1 January 2016 in Journal of Cleaner Production
29 February 2016 in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
The three main pillars of sustainability are the society, the environment, and the economy (people, planet, and profit). The key drivers that sustain these three pillars are energy and resource efficiency, a clean and ‘green’ environment that incorporates effective waste reduction and management, and finally cost-effective production. Sustainable manufacturing implies technologies and/or techniques that target these key drivers during product manufacture. Because of the effort and costs involved in the machining of titanium and its alloys, there is significant scope for improved sustainable manufacturing of these materials. Titanium and its alloys are extensively used for specialized applications in aerospace, medical, and general industry because of their superior strength-to-weight ratio and corrosion resistance. They are, however, generally regarded as difficult-to-machine materials. This article presents an overview of previous and current work and trends as regards to sustainable machining of titanium and its alloys. This article focuses on reviewing previous work to improve the sustainable machining of titanium and its alloys with specific reference to the selection of optimum machining conditions, effect of tool materials and geometry, implementing advanced lubrication and/or cooling techniques, and employing advanced and hybrid machining strategies. The main motivation is to present an overview of the current state of the art to discuss the challenges and to suggest economic and environment-friendly ways for improving the machinability of titanium and its alloys.
1 September 2016 in Materials & Design
12 February 2010 in Urban Water Journal
The effect of water pressure in a pipe on the rate of leakage from leak openings in the pipe is one of the main factors influencing leakage that is still not understood sufficiently. In this study, the behaviours of different types of leak openings (round holes and longitudinal and circumferential cracks) on pressurized pipes were investigated for different pipe materials (uPVC, steel, cast iron and asbestos cement) using finite element analysis. Linear elastic behaviour was assumed. The study found that (1) pipe stresses are significantly affected by a leak opening, and can easily exceed the material's yield strength in the vicinity of the opening; (2) round holes show the smallest expansion with pressure, followed by circumferential cracks and then longitudinal cracks; (3) the areas of all leak openings increase linearly with pressure; (4) longitudinal pipe stresses affect the behaviours of round holes and circumferential cracks, but not that of longitudinal cracks; and (5) the effect of pressure on a leak opening increases exponentially with increasing hole diameter or crack length. An equation is proposed for modelling the effect of pressure on individual leaks.
1 August 2016 in International Journal of Mechanical and Materials Engineering
30 December 2015 in Journal of the Brazilian Society of Mechanical Sciences and Engineering