A video graphics array (VGA) (640 x 480) indirect time-of-flight (ToF) CMOS image sensor has been designed with 4-tap 7-μm global-shutter pixel in 65-nm back-side illumination (BSI) process. With a 4-tap pixel structure, we achieved motion artifact-free depth map. Peak current during exposure time has been reduced by current spreading with constant delay chain in the photo-gate driver. Column fixed-pattern phase noise (FPPN) from the constant delay chain is self-compensated by the proposed time-interleaving technique with the two inversely directional clock chains in the photo-gate driver. Quantum efficiency (QE) and demodulation contrast (DC) have been optimized by using appropriate optical engineering techniques with an optimal silicon thickness. As a result, QE of 34% at 940-nm near-infrared and high DC of 86% at 100-MHz modulation frequency have been achieved. In addition, motion artifact and column FPPN are successfully removed in the depth map. The proposed ToF sensor shows depth noise less than 0.57% with 940-nm illuminator over the working distance up to 4 m, and consumes only 160 mW for VGA output at 60 frames/s.
6 October 2021 in IEEE Journal of Solid-State Circuits
A 1.2-Mpixel indirect time-of-flight (ToF) CMOS image sensor is presented to lower peak current and to cancel out multi-user interference. The proposed 4-tap 3.5-μm demodulation pixel is optimally designed to improve quantum efficiency (QE) and demodulation contrast (DC). A new ``multiple-interleaving'' scheme is proposed to reduce the peak current and self-compensate fixed-pattern phase noise (FPPN) with the minimal side effect of DC imbalance. To cancel out interference from the other ToF sensors, a multi-user interference cancellation (MUIC) scheme based on pseudorandom modulation is adopted. From the measurement results, we achieve a high QE of 38% at 940 nm and a high DC of 96% and 80% at 100- and 200-MHz modulation frequencies, respectively. With the superior pixel performance, the depth noise of <0.92% and <0.3% is achieved at the full and 2 x 2 binning modes, respectively. The multiple-interleaving scheme suppresses the peak current to less than 0.9 A and removes the column FPPN with constant DC for the whole pixel array. The proposed MUIC proves that at least two interferers can be successfully rejected. The sensor chip is fabricated in a two-stack process with 65 nm for the top die and 65 nm for the bottom die.