Piezoelectric 1-3 composite material sensors are used in phased array ultrasonic testing systems. The Dice-and-Fill technique is a very flexible method to fabricate these materials for frequencies up to 10 MHz. A polarized PZT plate is cut in two directions with a dicing saw to separate the PZT pillars. The pitch of the microstructure has to be finer with increasing center frequency to suppress spurious modes. Square shaped pillars with a width of 55 mum, a distance of 30 mum and a height of more than 500 mum are realized. The required times for the dicing process and the number of defects afterwards are compared for various materials. Additionally the usability of ceramic materials for mechanical dicing is evaluated. After the dicing process the structure is filled with a passive polymer, grinded and metalized by physical vapor deposition. The different mechanical and thermal properties of the PZT ceramic and the epoxy filling result in high demands on the electrical interconnection of the composite material. Different methods are investigated. It shows that hot bar soldering is most suitable. A soldering process based on SnBi solder is optimized.
El objetivo de este análisis es estudiar la representación de casos de solidaridad e insolidaridad entre personajes femeninos en la novela La rampa (1917) de Carmen de Burgos. En la novela se observa una gran variedad de interacciones entre mujeres, desde el apoyo incondicional hasta las envidias y traiciones. En muchas de las escenas en que existe tensión entre personajes femeninos hay también un énfasis en la virtud de la mujer o las diferencias de clase social. También se ofrece un análisis de técnicas narrativas empleadas, como el estilo indirecto libre y la focalización plural, que sirven para involucrar más a los lectores en la narración.