Carbazole-based oxidative coupling polymerization is an efficient method to prepare various porous polycarbazoles without requirement of any specific functional groups for coupling polymerization. Herein, facile preparation of porous conjugated polymers (CPOP-11 and CPOP-12) using porphyrin or Fe(II)–porphyrin as core structures through this approach is reported. The Brunauer–Emmett–Teller specific surface area of the obtained polymers is up to 1320 m2 g−1, which is comparable to metalloporphyrin based porous polymers prepared by other coupling polymerization methods. It is worth noting that the adsorption amount of toluene by CPOP-12 is high up to 1192 mg g−1 (about 13.0 mmol g−1) at its saturated vapor pressure, which would be very promising to eliminate harmful small aromatic molecules in the environment. As a kind of hydrophobic material, CPOP-11 could be more useful to extract methanol from water due to its high mass ratio of adsorbed methanol to water. Meanwhile, a porous polymer containing Fe(II)–porphyrin (CPOP-12) is also an effective catalyst for the formation of glycosyl sulfoxides from sulfides by promoting the transfer of oxygen atoms and can be reused without significant decrease in catalytic activity and amount of catalyst.
22 September 2009 in Macromolecular Rapid Communications
The frequency, current, and phase of the transmission of high-voltage power lines are important measures of the quality of the power transmission. Therefore, it is very important to monitor the power transmission quality in real time. This thesis designs a portable non-contact online monitoring system for power quality of tramsmission lines. Using electromagnetic inductionprinciple to collect the induced current of AC high-voltage trasmission lines. The signal processing circuit converts the collected current signal into a stable voltage signal and displays the output. The current waverforms in the transmission lines can be monitored in real time. Experimental result show that the system can obtain current amplitude of instantaneous high-voltage transmission line, waveform quality, frequency fluctuations and other information.
The magnetic levitation system has the advantages of small friction and non-contact. For better application, it is necessary to carry out in-depth analysis and research on the magnetic levitation system and to process the data of the suspension. Since the rejection magnetic levitation system has a better balance range than the suction type magnetic levitation system, a rejection magnetic levitation system is designed. The dynamic equation of the rejection magnetic levitation system is established by analysis and the simulink system simulation is carried out according to the established dynamic equation. The stability balance of the repulsion magnetic levitation system is proved. The measurement data of the magnetic levitation system under external vibration conditions were measured by experiments and field experiments, and the external interference signals were removed by wavelet analysis. The experimental results verify that the designed rejection magnetic suspension system can work stably and has strong impact resistance. This design analysis method provides a theoretical basis for the wide application of magnetic levitation systems
The Cover Feature shows the important development of carbon-based materials in the electrocatalytic reduction of nitrogen to ammonia. Ammonia is essential for industries such as industry and agriculture. Carbon-based materials with many characteristics (adjustable structure, atomic doping, metal-loaded, etc.) are favored. More information can be found in the Review by Y. Zhao, L. Yan and X. Zhao.