1 October 2013 in Materials Science and Engineering: C
1 August 2017 in International Journal of Hydrogen Energy
SSShailesh Narayan Sharma
1 September 2017 in Journal of Cleaner Production
27 September 2016 in Scientific Reports
Phosphorene is a recently new member of the family of two dimensional (2D) inorganic materials. Besides its synthesis it is of utmost importance to deposit this material as thin film in a way that represents a general applicability for 2D materials. Although a considerable number of solvent based methodologies have been developed for exfoliating black phosphorus, so far there are no reports on controlled organization of these exfoliated nanosheets on substrates. Here, for the first time to the best of our knowledge, a mixture of N-methyl-2-pyrrolidone and deoxygenated water is employed as a subphase in Langmuir-Blodgett trough for assembling the nanosheets followed by their deposition on substrates and studied its field-effect transistor characteristics. Electron microscopy reveals the presence of densely aligned, crystalline, ultra-thin sheets of pristine phosphorene having lateral dimensions larger than hundred of microns. Furthermore, these assembled nanosheets retain their electronic properties and show a high current modulation of 104 at room temperature in field-effect transistor devices. The proposed technique provides semiconducting phosphorene thin films that are amenable for large area applications.
3 August 2017 in Nano Research
Producing environmentally stable monolayers and few-layers of hafnium disulphide (HfS2) with a high yield to reveal its unlocked electronic and optoelectronic applications is still a challenge. HfS2 is a layered two-dimensional material of group-IV transition metal dichalcogenides. For the first time, we demonstrate a simple and cost-effective method to grow layered belt-like nanocrystals of HfS2 with a notably large interlayer spacing followed by their chemical exfoliation. Various microscopic and spectroscopic techniques confirm that these as-grown crystals exfoliate into single or multiple layers in a few minutes using solvent assisted ultrasonification method in N-cyclohexyl-2-pyrrolidone. The exfoliated nanosheets of HfS2 exhibit an indirect bandgap of 1.3 eV with high stability against surface degradation. Furthermore, we demonstrate that these nanosheets hold potential for electronic applications by fabricating a field-effect transistor based on few-layered HfS2, exhibiting a field-effect mobility of 0.95 cm2/(V·s) with a high on/off current modulation ratio of 10,000 in ambient conditions. The method is scalable and has a potential significance for both academic and industrial purposes.
12 June 2015 in RSC Advances
A variety of pH responsive hydrogels possessing macroporous interiors resembling a honey-comb framework with a continuous skin on the surface have been developed by free radical aqueous copolymerization of acrylic acid (AAc) and 2-(dimethylamino)ethyl methacrylate (DMAEMA) (poly(AAc-co-DMAEMA) (PAD) hydrogels). This one step polymerization process makes scaling-up easier for mass production. Our formulations, being devoid of any chemical cross-linkers, remained dimensionally stable in buffer solutions of pH 1.2–7.4 with interlocked nanogels being identified as the building blocks of the network structures. Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), uniaxial compression testing and scanning electron microscopy (SEM) were used to characterize the hydrogels (PADs). Compressive elastic modulus and compressive strength of the swollen hydrogels at pH 7 were found to vary with composition from ∼3 to ∼11 kPa and ∼178 to ∼206 kPa, respectively. The swollen gels showed fairly strong viscoelastic behaviour and underwent deformation from ∼70% to 85% before failure, indicating the formation of robust 3D structures of PADs. Preliminary investigation into the biocompatibility of our hydrogels done by cytotoxicity assays using HeLa and McCoy mouse fibroblast cell lines have revealed that they are non-cytotoxic, paving the way for further biomedical applications. Swelling behaviour and release kinetics of bovine serum albumin (BSA) were investigated in various buffer solutions that mimic the pH-metric hierarchy in the gastrointestinal (GI) tract. Equilibrium swelling ratio was found to vary from 171% (mass) to 2027% (mass) depending on the pH and composition of hydrogels. Different compositions of PAD systems were investigated to verify the possibility of tailor-making the drug release behaviour of PAD formations.