Over the past decades, because of boosted energy demands and the serious concerns of climate change, inverter-based resources (IBRs) have been widely deployed to integrate renewable energy into power systems for the goal of carbon neutrality. Thanks to the full controllability of power electronic devices, IBRs have the capability to implement reliable and flexible power regulation, which makes them technically feasible for enhancing the resilience and energy efficiency of power systems.
9 September 2022 in International Journal of Aerospace Engineering
Experimental investigations have been carried out on the flow characteristics of the last stage long blades operating under off-design conditions. A model turbine test rig similar to a small power station was applied. The last stage blades with a scaling factor of 1 : 4.8 was used for pneumatic experiments. The rotor blade height was 375 mm, and the rotation speed was set to 7200 rpm. Five volumetric flow coefficients were utilized, corresponding to =0.61, 0.77, 0.92, 1.02, and 1.15. Pneumatic probes were used to focus on measuring pressures and swirl angles. The variation of different pneumatic parameters along the span and circumferential direction was investigated. The change patterns of the three-dimensional aerodynamic characteristics of the last stage blades during the off-design conditions were revealed. Results indicated that there was a high correlation between the variation of pneumatic parameters and different off-design conditions. In particular, the large meridional expansion angle at the tip led to abrupt changes in the inlet parameters, and the overlap even occupied by 17% blade height. Due to the influence of the exhaust hood, the circumferential static pressure-unevenness was up to 77.8% at the last stage outlet.