20 March 2023 in IEEE Transactions on Industrial Informatics
Recent diagnostic approaches based on the deep learning model have attracted much attention. However, developing an outstanding AI diagnostic model requires many training samples with labeled information. Moreover, training deep models is labor-intensive and time-consuming, and labeling samples and training models increase workload. To overcome these problems, this article proposes an unsupervised deep transfer learning (DTL) method with an isolation forest (iForest) for machine fault diagnosis. First, the isolation forest is used to classify and label the samples automatically; then, these labeled data are used to train deep learning (DL) models; finally, small data with the label of the target domain are used to fine-tune parameters and complete the fault diagnosis. The proposed approach has been validated with the fan gearbox dataset, the bearing dataset, and the ball screw dataset. The results show that the proposed unsupervised deep transfer learning model has high accuracy and generality.
15 February 2023 in IEEE Transactions on Power Electronics
Low torque ripple level is the prerequisite for surface-mounted permanent magnet synchronous machines (SPMSM) to maintain control accuracy and speed stability. Since the speed harmonic's amplitude is proportional to the torque harmonic's amplitude, torque ripple can be reduced by speed harmonic minimization. Harmonic injection method is a practical speed harmonic minimization method. But current harmonic regulation and complex theoretical derivation are required in existing methods. What's more, the effectiveness of many methods will deteriorate when the parameters of PMSM and PI controllers vary. In order to avoid the influence of parameter variations and complex algorithms, an amplitude-phase based optimal voltage harmonic injection method is proposed for speed harmonic minimization in this paper. The influence of the injected voltage harmonic's amplitude and phase on the speed harmonic's amplitude is firstly analyzed. And then a simple speed harmonic controller based on the optimization of injection voltage harmonic's amplitude and phase is designed. The proposed method does not rely on the motor parameters. Moreover, the proposed method is easy to implement. It does not need to regulate current harmonics. The proposed method is simulated and experimentally evaluated under both steady-state and transient conditions.
5 February 2024 in Knowledge-Based Systems