14 May 2013 in IEEE Transactions on Industry Applications
MBMohamed Fodil Boukhoulda
Recycling of plastics from industrial wastes requires appropriate sorting technologies, such as the free-fall electrostatic separation of tribocharged granular materials. This paper introduces a novel electrostatic separation process characterized by the fact that the granules to be separated are charged in a fluidized bed affected by an electric field generated by two rotating roll electrodes. The experimental design methodology was employed for the modeling and optimization of the separation of a mixture composed of acrylonitrile butadiene styrene (ABS) and high-impact polystyrene (HIPS), originating from shredded obsolete computer cases. After processing the experimental data using the MODDE 5.0 software, the masses of ABS, HIPS, and middling collected after separation were expressed as quadratic functions of three of the control variables of the process: 1) duration; 2) speed of the fluidization air; and 3) high voltage applied to the electrode system. The obtained results demonstrate the effectiveness of this method for the separation of plastics from granular wastes.
13 June 2014 in International Journal of Environmental Studies
As robustness of any industrial process is an important issue, a standard procedure is used to determine the set point and to minimize the process variability of juice extraction to changes in values of some critical factors. This paper reports work to analyse the efficiency of the pulsed electrical fields carrot juice extraction process even when the control factors undergo slight random variation. The experiments were carried out on a laboratory experimental bench. The work concerned the choice of three factors which are the high voltage level V (kV), the number of pulses and the pulse duration T. Three ‘one-factor-at-a-time experiments’, followed by two factorials designs (one composite, the other fractional), were performed following a well-defined experimental procedure: (1) Fixing the variation domain of the input variables; (2) seeking the optimum set point and (3) analysing the robustness of the process i.e. testing whether the performance of the system remains high even when the factors vary slightly around the set point.