12 March 2024 in IEEE Communications Standards Magazine
In recent years, WiFi has been shown to be a viable technology to enable a wide range of sensing applications, such as device-free localization, motion recognition, or human identification. Due to the growing interest in WiFi sensing, Task Group IEEE 802.11bf (TGbf) was formed to develop an amendment to the IEEE 802.11 standard that will enhance its ability to support WiFi sensing and applications. In this article, we identify and describe the main definitions and features of the IEEE 802.11bf amendment as defined in its D0.5 draft. Our focus is on the Wireless Local Area Network (WLAN) sensing procedure, which supports bistatic and multistatic WiFi sensing in license-exempt frequency bands below 7 GHz. We also present an overview of basic sensing principles, and provide a detailed discussion of features defined in the IEEE 802.11bf amendment that enhance client-based WiFi sensing.
6 February 2023 in ACM Transactions on Multimedia Computing, Communications, and Applications
Dual-connectivity streaming is a key enabler of next-generation six Degrees Of Freedom (6DOF) Virtual Reality (VR) scene immersion. Indeed, using conventional sub-6 GHz WiFi only allows to reliably stream a low-quality baseline representation of the VR content, while emerging high-frequency communication technologies allow to stream in parallel a high-quality user viewport-specific enhancement representation that synergistically integrates with the baseline representation to deliver high-quality VR immersion. We investigate holistically as part of an entire future VR streaming system two such candidate emerging technologies, Free Space Optics (FSO) and millimeter-Wave (mmWave), that benefit from a large available spectrum to deliver unprecedented data rates. We analytically characterize the key components of the envisioned dual-connectivity 6DOF VR streaming system that integrates in addition edge computing and scalable 360° video tiling, and we formulate an optimization problem to maximize the immersion fidelity delivered by the system, given the WiFi and mmWave/FSO link rates, and the computing capabilities of the edge server and the users’ VR headsets. This optimization problem is mixed integer programming of high complexity and we formulate a geometric programming framework to compute the optimal solution at low complexity. We carry out simulation experiments to assess the performance of the proposed system using actual 6DOF navigation traces from multiple mobile VR users that we collected. Our results demonstrate that our system considerably advances the traditional state of the art and enables streaming of 8K-120 frames-per-second (fps) 6DOF content at high fidelity.
16 January 2023 in IEEE Open Journal of Vehicular Technology
IEEE 802.11bf amendment is defining the wireless Local Area Network (WLAN) sensing procedure, which supports sensing in license-exempt frequency bands below 7 GHz, and the Directional Multi-Gigabit (DMG) sensing procedure for license-exempt frequency bands above 45 GHz. In this paper, we examine the use of Millimeter-Wave (mmWave) Wi-Fi to enable high-resolution sensing. We first provide an introduction to the principle of sensing and the modifications defined by the IEEE 802.11bf amendment to IEEE 802.11 to enable mmWave Wi-Fi sensing. We then present a new open-source framework that we develop to enable the evaluation of the DMG sensing procedure accuracy. We finally quantify the performance of the DMG sensing in terms of the velocity/angle estimate accuracy, and its overhead on the communication link. Results show that the DMG sensing procedure defined in IEEE 802.11bf is flexible enough to accommodate a wide range of sensing applications. For the bistatic scenario considered, the velocity accuracy is in the interval 0.1 m/s to 0.4 m/s, while the angular accuracy is between 1 degree and 8 degrees depending on the sensing parameters used. Ultimately, the overhead introduced by sensing is limited with a sensing overhead below 5.5% of the system symbol rate.