In this paper, an engineering approach to estimation of the fundamental stray load and iron losses in small induction machines (IMs) is proposed. This approach consists of experimental testing carried on several IMs of different efficiency class and rotor cage material, all rated 1.5 kW, followed by the derivation of simple empirical formulas for estimation of these two types of losses. The iron losses are evaluated as variable with respect to the operating frequency and flux, whereas the stray load losses are evaluated as variable with respect to the operating frequency, flux, and torque. Application of the proposed formulas does not require any additional tests other than those imposed by international standards, and, equally important, they do not include any constructional details of the IM. The validity of the formulas is verified by comparison of the estimated and measured losses in wide ranges of the operating frequency, flux, and torque. The proposed methods of estimation offer possibilities for application in the analysis of small IMs under various operating conditions with sinusoidal supply, as well as in developing advanced IM models and vector control algorithms.
This paper provides analysis of losses in the hysteresis-driven three-phase power converter with IGBTs and free-wheeling diodes. The converter under consideration is part of the self-excited induction generator (SEIG) vector control system. For the analysis, the SEIG vector control system is used in which the induction generator iron losses are taken into account. The power converter losses are determined by using a suitable loss estimation algorithm reported in literature. The chosen algorithm allows the power converter losses to be determined both by type (switching/conduction losses) and by converter component (IGBT/diode losses). The overall power converter losses are determined over wide ranges of rotor speed, dc-link voltage and load resistance, and subsequently used for offline correction of the overall control system’s losses (efficiency) obtained through control system simulations with an ideal power converter. The control system’s efficiency values obtained after the correction are compared with the measured values.
31 October 2016 in International Review on Modelling and Simulations (IREMOS)