1 April 2020 in Computer Physics Communications
MLMarnix P. van Schrojenstein Lantman
Marnix P. van Schrojenstein Lantman
+13
1 January 2018 in KONA Powder and Particle Journal
17 September 2019 in Scientific Reports
Granular segregation is a common, yet still puzzling, phenomenon encountered in many natural and engineering processes. Here, we experimentally investigate the effect of particles cohesion on segregation in dry monodisperse and bidisperse systems using a rotating drum mixer. Chemical silanization, glass surface functionalization via a Silane coupling agent, is used to produce cohesive dry glass particles. The cohesive force between the particles is controlled by varying the reaction duration of the silanization process, and is measured using an in-house device specifically designed for this study. The effects of the cohesive force on flow and segregation are then explored and discussed. For monosized particulate systems, while cohesionless particles perfectly mix when tumbled, highly cohesive particles segregate. For bidisperse mixtures of particles, an adequate cohesion-tuning reduces segregation and enhances mixing. Based on these results, a simple scheme is proposed to describe the system’s mixing behaviour with important implications for the control of segregation or mixing in particulate industrial processes.
19 December 2019 in Granular Matter
This paper aims to understand the effect of different particle/contact properties like friction, softness and cohesion on the compression/dilation of sheared granular materials. We focus on the local volume fraction in steady state of various non-cohesive, dry cohesive and moderate to strong wet cohesive, frictionless-to-frictional soft granular materials. The results from (1) an inhomogeneous, slowly sheared split-bottom ring shear cell and (2) a homogeneous, stress-controlled simple shear box with periodic boundaries are compared. The steady state volume fractions agree between the two geometries for a wide range of particle properties. While increasing inter-particle friction systematically leads to decreasing volume fractions, the inter-particle cohesion causes two opposing effects. With increasing strength of cohesion, we report an enhancement of the effect of contact friction i.e. even smaller volume fraction. However, for soft granular materials, strong cohesion causes an increase in volume fraction due to significant attractive forces causing larger deformations, not visible for stiff particles. This behaviour is condensed into a particle friction—Bond number phase diagram, which can be used to predict non-monotonic relative sample dilation/compression.
4 August 2014 in AIChE Journal
1 December 2019 in Advanced Powder Technology