The purpose of this study was to evaluate the performance of widely used artificial intelligence (AI) chatbots in answering prosthodontics questions from the Dentistry Specialization Residency Examination (DSRE). A total of 126 DSRE prosthodontics questions were divided into seven subtopics (dental morphology, materials science, fixed dentures, removable partial dentures, complete dentures, occlusion/temporomandibular joint, and dental implantology). Questions were translated into English by the authors, and this version of the questions were asked to five chatbots (ChatGPT-3.5, Gemini Advanced, Claude Pro, Microsoft Copilot, and Perplexity) within a 7-day period. Statistical analyses, including chi-square and z-tests, were performed to compare accuracy rates across the chatbots and subtopics at a significance level of 0.05. The overall accuracy rates for the chatbots were as follows: Copilot (73%), Gemini (63.5%), ChatGPT-3.5 (61.1%), Claude Pro (57.9%), and Perplexity (54.8%). Copilot significantly outperformed Perplexity (P = 0.035). However, no significant differences in accuracy were found across subtopics among chatbots. Questions on dental implantology had the highest accuracy rate (75%), while questions on removable partial dentures had the lowest (50.8%). Copilot showed the highest accuracy rate (73%), significantly outperforming Perplexity (54.8%). AI models demonstrate potential as educational support tools but currently face limitations in serving as reliable educational tools across all areas of prosthodontics. Future advancements in AI may lead to better integration and more effective use in dental education.
18 October 2022 in Journal of Advanced Oral Research
Purpose: The aim of this study was to examine the effects of various sintering procedures on the color parameters, marginal, and internal fit of zirconia crowns. Materials and Methods: Overall, 60 zirconia crowns were produced using 3 distinct zirconia blocks (Wieland Zenostar, Zirkonzahn Ice Translucent, and Zirkonzahn Prettau). For the sintering procedure of the crowns, six groups were created as follows: Wieland-Standard, Wieland-Speed, Ice-Standard, Ice-Speed, Prettau-Slow, and Prettau-Standard programs. The crowns were assigned into groups ( n = 10 in each group). The color parameters, marginal fit, and internal fit of the crowns were evaluated. The normality of data distribution was evaluated with the Kolmogrov–Smirnov test. Two independent samples t-test and Mann–Whitney U test were used to compare the sintering groups. Results: Acceleration of sintering caused a significant change in the color parameters of the Wieland and Ice groups but not in the Prettau group. In the Wieland group, marginal ( p = .047) and internal ( p = .004) gap values of speed sintering were found to be significantly lower than those in standard sintering. In the Ice group, the marginal gap values of speed sintering were found to be significantly lower than those in standard sintering ( p = .019). In the Prettau group, the marginal gap values of standard sintering were found to be significantly higher ( p = .035) than those in slow sintering. Conclusions: It was concluded that the effects of sintering procedures on color parameters, and internal and marginal fit of zirconia crowns were clinically insignificant. Speed sintering can be recommended for zirconia restorations.
The purpose of this study was to compare dental anxiety levels among first-, second-, third-, fourth- and fifth-year dental students. To evaluate the level of dental anxiety against dental interventions, online questionnaires were applied to first year (n=96), second year (n=96), third year (n=109), fourth year (n=107) and fifth year (n=92) dental students. The students' demographic information (age, gender) was also recorded. These questionnaires included the Modified Dental Anxiety Scale (MDAS). The students whose MDAS score was ≥19 were considered as highly anxious. The statistical analysis was performed using IBM SPSS Statistics 24 (IBM SPSS, USA). This study was conducted with a total of 500 students including 220 male and 280 female students. The students with an MDAS score of 19 (having dental anxiety) were 23 people (4.6%) in total. No statistically significant difference was found between the class years of the students in terms of their mean MDAS scores (p: 0.387). When the responses given to the 5 items in MDAS were evaluated, only the responses given to the 1st and 5th questions had statistically significant differences (p
The purpose of this study was to examine the influence of fast sintering on the optical properties, fracture strength, and microstructure of monolithic zirconia (MZ) ceramics. After 20 disc-shaped and 4 square-shaped samples from the MZ block were machined in the CAM device, groups were created by the sintering procedure in accordance with the manufacturer's recommendations: Standard (Grup S; disc-shaped n = 10 square-shaped n = 2) and fast (Grup F; disc-shaped n = 10 square-shaped n = 2). Then, hydrothermal aging was applied to all samples. To calculate translucency, opalescence, and fluorescence values, the LabCh color data of the samples were defined using spectrophotometers. The disc samples were biaxially fracture tested, and the values were determined. The chemical content, grain size (GS), and phase composition of the square-shaped samples were analyzed, respectively. Since the grain size did not conform to the normal distribution, the Mann–Whitney U test was used for statistical analysis, and all other variables were analyzed by an independent sample t test ( α = 0.05). The sintering procedure affected translucency, opalescence, fracture strength, and GS significantly ( P < 0.05), but not fluorescence ( P > 0.05). While both groups had similar crystal structures, there were some minor differences in chemical content. All samples had a higher fracture strength than the ISO 6872 standard recommends. The sintering procedure had no clinically significant effect on the optical properties of MZ. The fast sintering procedure of MZ can be recommended.
Amaç: Bu çalışmanın amacı; temporomandibular eklem iç düzensizliği olan hastaların yaş, cinsiyet, medeni durum, iş durumu ve eğitim durumu gibi demografik bilgilerinin incelenmesidir. Gereç ve Yöntemler: Araştırmaya dahil edilen hastalar Erciyes Üniversitesi Diş Hekimliği Fakültesi’ne temporomandibular eklemindeki problemden dolayı başvuran kişiler arasından randomize olarak seçilmiştir. Hastalardan bilgilendirilmiş onam formu alınmıştır. Çalışma toplamda 80 kişiyi kapsamaktadır. Bulgular: Çalışmaya dahil edilen 13 – 61 yaşları arasındaki bireylerin yaş ortalamaları 26.90 ± 10.33’dür. Temporomandibular iç düzensizliği bulunan hastalar cinsiyet dağılımını açısından incelendiğinde, kadınlarda hastalığın erkeklere oranla istatistiksel olarak anlamlı ölçüde fazla görüldüğü tespit edilmiştir (p<0.001). Eğitim durumu ilişkisi incelendiğinde, üniversite mezunu olan bireylerin istatistiksel olarak anlamlı ölçüde daha fazla hastalığa yakalandığı saptanmıştır ( p <0.001). Temporomandibular iç düzensizliğin herhangi bir işte çalışmayanlarda istatistiksel olarak anlamlı oranda daha yüksek olduğu tespit edilmiştir (p<0.001). Medeni durum ilişkisi incelendiğinde, evli olmayan bireylerde hastalığın istatistiksel olarak anlamlı oranda fazla görüldüğü bulunmuştur (p<0.001). Sonuçlar: Araştırmadan elde edilen veriler incelendiğinde temporomandibular eklem iç düzensizliğinin kadınlarda erkeklere oranla (3.7/1) daha çok görüldüğü tespit edilmiştir. Yaş ortalamasının 26.90 ± 10.33 olması, temporomandibular eklem iç düzensizliğinin gençlerde daha sık görüldüğünü ortaya koymuştur. Bu çalışmada evli olmayan, üniversite mezunu ve herhangi bir işte çalışmayan bireylerin hastalığa yakalanma oranı daha fazla bulunmuştur. Anahtar Kelimeler: Cinsiyet, eğitim durumu , medeni durum, t emporomandibular eklem iç düzensizliği, yaş
This study aimed to evaluate the interdisciplinary relationship between the Department of Restorative Dentistry and Prosthetic Dentistry by analyzing interdepartmental consultation request notes. A secondary objective was to compare referral patterns according to clinician training level (specialist vs. postgraduate student). A total of 1449 consultation request notes from patients treated at the faculty of dentistry were retrospectively examined and categorized. Among them, 515 requests originated from the Department of Restorative Dentistry to the Prosthetic Dentistry, while 934 requests were made from Department Prosthetic Dentistry to Restorative Dentistry. Statistical analyses were performed using IBM SPSS version 23. The most frequent consultation request from Department Restorative Dentistry to Prosthetic Dentistry was related to crown-bridge removal (n= 242; 47%), whereas the most common request from Prosthetic Dentistry to Restorative Dentistry was for restoration procedures (n = 513; 54.9%). The findings indicate that consultation requests most commonly occurred in situations where clinical procedures extended beyond the scope of a single department’s expertise. Moreover, the distribution of referrals revealed a consistent pattern associated with clinician training level, with postgraduate students accounting for the majority of interdepartmental requests. Together, these results suggest that referrals between departments are shaped by both procedural complexity and the hierarchical structure of clinical training, rather than occurring on an arbitrary basis