22 October 2014 in IEEE Journal on Emerging and Selected Topics in Circuits and Systems
Radio-frequency (RF)-powered energy harvesting systems have offered new perspectives in various scientific and clinical applications such as health monitoring, bio-signal acquisition, and battery-less data-transceivers. In such applications, an RF rectifier with high sensitivity, high power conversion efficiency (PCE) is critical to enable the utilization of the ambient RF signal power. In this paper, we explore the high PCE advantage of the steep-slope III-V heterojunction tunnel field-effect transistor (HTFET) RF rectifiers over the Si FinFET baseline design for RF-powered battery-less systems. We investigate the device characteristics of HTFETs to improve the sensitivity and PCE of the RF rectifiers. Different topologies including the two-transistor (2-T) and four-transistor (4-T) complementary-HTFET designs, and the n-type HTFET-only designs are evaluated with design parameter optimizations to achieve high PCE and high sensitivity. The performance evaluation of the optimized 4-T cross-coupled HTFET rectifier has shown an over 50% PCE with an RF input power ranging from -40 dBm to -25 dBm, which significantly extends the RF input power range compared to the baseline Si FinFET design. A maximum PCE of 84% and 85% has been achieved in the proposed 4-T N-HTFET-only rectifier at -33.7 dBm input power and the 4-T cross-coupled HTFET rectifier at -34.5 dBm input power, respectively. The capability of obtaining a high PCE at a low RF input power range reveals the superiority of the HTFET RF rectifiers for battery-less energy harvesting applications.
29 October 2018 in IEEE Transactions on Electron Devices
In this paper, we describe an improved SPICE model for the negative capacitance field-effect transistor (NCFET). According to the law of conservation of charge, the model is built based on the relationship between the gate charge of the MOSFET and the charge reserved by the ferroelectric layer and includes the parasitic resistance and capacitance into consideration. Based on the model, the drain-induced barrier lowering (DIBL) and the negative resistance (NR) of the NCFET are analyzed. Finally, taking two well-known analog blocks (the current mirror and the latch comparator) for example, impacts of the DIBL effect and the NR property on analog circuit performances are discussed. Thanks to utilization of the NR feature, not only can impacts of the DIBL effect and the channel-length modulation (CLM) effect be alleviated to improve the mirroring accuracy, but also the comparison speed of the latch comparator be accelerated.
2 June 2017 in IEEE Transactions on Circuits and Systems I: Regular Papers
Nonvolatile computing has been proven to be effective in dealing with power supply outages for on-chip check-pointing in emerging energy-harvesting Internet-of-Things applications. It also plays an important role in power-gating to cut off leakage power for higher energy efficiency. However, existing on-chip state backup solutions for D flip–flop (DFF) have a bottleneck of significant energy and/or latency penalties which limit the overall energy efficiency and computing progress. Meanwhile, these solutions rely on external control that limits compatibility and increases system complexity. This paper proposes an approach to fundamentally advancing the nonvolatile computing paradigm by intrinsically nonvolatile area-efficient latches and flip–flops designs using negative capacitance FET. These designs consume fJ-level energy and ns-level intrinsic latency for a backup plus restore operation, e.g., 2.4 fJ in energy and 1.1 ns in time for one proposed nonvolatile DFF with a supply power of 0.80 V.
5 June 2017 in IEEE Transactions on Electron Devices
Nonvolatile SRAM (nvSRAM) has emerged as a promising approach to reducing the standby energy consumption by storing the state into an in situ nonvolatile memory element and shutting down the power supply. Existing nvSRAM solutions based on a nonvolatile backup in magnetic tunnel junction and ReRAM, however, are costly in backup and restore energy due to static current. This cost results in a long break-even time (BET) when compared with a lowered voltage standby volatile SRAM. This brief proposes an nvSRAM based on ferroelectric FETs (FeFETs) that are capable of fully avoiding such static current. A simple differential backup and restore circuitry is proposed, achieving sub-fJ/cell total energy per backup and restore operation at the 10-nm node. This leads to hundreds of times BET improvement over existing ReRAM nvSRAM solutions. This nvSRAM also indicates the future FeFET design trends for such memory-logic synergy.