A multilayered semiconductor sensitizer structure composed of three differently sized CdSe quantum rods (QRs), labeled as Q530, Q575, Q590, were prepared and deposited on the surface of mesoporous TiO2 nanoparticles by electrophoretic deposition (EPD) for photovoltaic applications. By varying the arrangement of layers as well as the time of EPD, the photoconversion efficiency was improved from 2.0% with the single layer of CdSe QRs (TiO2/Q590/ZnS) to 2.9% for multilayers (TiO2/Q590Q575/ZnS). The optimal EPD time was shorter for the multilayered structures. The effect of CdS quantum dots (QDs) deposited by successive ionic layer adsorption and reaction (SILAR) was also investigated. The addition of CdS QDs resulted in the enhancement of efficiency to 4.1% for the configuration (TiO2/CdS/Q590Q575/ZnS), due to increased photocurrent and photovoltage. Based on detailed structural, optical, and photoelectrical studies, the increased photocurrent is attributed to broadened light absorption while the increased voltage is due to a shift in the relevant energy levels.
Gold nanoparticles (AuNPs), multi-branched gold nanoparticles (MBGNs), and silica-coated MBGNs (MBGNs-silica) were studied for rhodamine B (RB) and α-glucose detection at low concentration. The MBGNs SPR band in the NIR, which is tunable, is useful for SERS that was demonstrated using rhodamine B and α-glucose as probe molecules with detection limits of 50 pM and 5 mM (90 mg dL−1), respectively, much lower than that using regular AuNPs. The SERS signals of RB and α-glucose using MBGNs-silica are further enhanced with respect to AuNPs and MBGNs, which is attributed to the aggregation of the MBGNs and a stronger interaction. In the case of α-glucose, the functionalization process performed to both, α-glucose molecules and MBGNs, improves the interaction and allows measurements at low concentration.