10 November 2017 in IEEE Transactions on Antennas and Propagation
A large deployable reflector antenna is considered and designed for the application of a synthetic aperture radar (SAR) system requiring high gain for the high resolution of a detected image within a distance of a few hundred kilometers. For its lightweight and strong characteristics, carbon fiber reinforced polymer (CFRP), is introduced as a composite material and fabricated for conductivity evaluation. Effective electrical characteristics are obtained as a function of carbon fiber direction, using measured S-parameters in a rectangular waveguide. By taking into account the changes of the effective electrical characteristics that depend on the fiber direction of reflector antenna, the radiation pattern is investigated at X-band in terms of gain and polarization variation effects. The proposed reflector antenna made of quasi isotropic (QI) CFRP panel can realize the insensitive characteristics depending on the incident polarization.
31 January 2023 in Journal of Electromagnetic Engineering and Science
This paper analyzes the generation mechanism of a cross-polarized field resulting from panel misalignment errors in a solid-surface deployable antenna. Misalignment of the panel in a deployable antenna results in path length error and rotation of the unit normal vector on the reflector surface. However, in terms of the analysis of cross-polarization (cross-pol) generation, rotational error is a more significant factor. In the aperture field, the distributions of cross-pol components are calculated to identify the polarization characteristics of the radiated field. For uniform misalignment, the peak-to-cross polarization (XPOL) is found to be smaller than -50 dB for misalignment angles less than 3°. Furthermore, when the panels are non-uniformly misaligned with a sinusoidal distribution, the cross-pol level depends on the angular position of the maximum misalignment.
31 October 2019 in Journal of Electromagnetic Engineering and Science
28 September 2017 in IEEE Antennas and Wireless Propagation Letters
This letter presents a novel optimization via the theoretical modeling of an array geometry for isoflux patterns from a satellite antenna. The array has a multiring geometry capable of realizing the source distribution and ring radii similar to a sinc function shape. Additionally, the array uses the sequential changing of the phase excitations in order to favor circular polarization. By means of the cavity model, a synthesized electric field from the array antenna is formulated. For the desired isoflux pattern, the formulated electric field is analytically optimized via the least-squares regression iteration process. The results of the optimization show the approximately uniform electric-field illumination on the ground from a satellite antenna.