We present a radar sensor that was designed to detect and image moving objects/targets on the other side of a wall. The radar sensor was composed of a linear array of Vivaldi antenna elements, an radio frequency (RF) switch, a microcontroller unit, and an RF transceiver. For the linear array, a total of eight antenna elements were used as sensors in synthetic aperture radar (SAR) configuration in the cross-range axis to improve the resolution in this dimension. Design steps of Vivaldi antenna elements and the entire linear array were presented. After the design, the prototyping procedure and the details of the radar sensor were given. Through-the-wall radar (TWR) imaging experiments were performed for stationary and moving targets using the assembled sensor. The resultant TWR images after these experiments were presented. During the image formation, a back-projection type image focusing algorithm was implemented and applied to increase the signal-to-noise ratio of the raw images. The constructed radar images demonstrated that our radar sensor could successfully detect and image both stationary and moving targets on the other side of the wall.
24 March 2023 in Microwave and Optical Technology Letters
In this paper, we propose an ultrawide band design for the double ridged horn (DRH) antenna to be used behind the obstacle radar (BOR) applications such as ground penetrating radar (GPR) and through the wall radar (TWR) imaging. The design is developed and optimized by the help of full electromagnetic simulator code; CST. The design parameters such as frequencies of operation and the half power beam width (HPBW) are taken into account by considering the BOR application requirements. The design double ridged horn antenna provides a frequency bandwidth between 1.5 GHz and 7 GHz and HPBW around 30° around the center frequency that are very suitable for GPR and TWR applications. The final optimized design that is formed by CST is physically manufactured and measured. The prototyped DRH antenna’s measurement antenna parameter results are in good agreement with the simulated ones.
1 October 2019 in Journal of Applied Remote Sensing
The Journal of Applied Remote Sensing (JARS) is an online journal that optimizes the communication of concepts, information, and progress within the remote sensing community to improve the societal benefit for monitoring and management of natural disasters, weather forecasting, agricultural and urban land-use planning, environmental quality monitoring, ecological restoration, and numerous other commercial and scientific applications.
15 February 2023 in International Journal of Engineering and Geosciences
In this study, a high-gain and dual-polarized Quad Ridged Horn Antenna (QRHA) is proposed and designed to be used in Obstacle Penetrating Imaging Radar (OPIR) applications. The quad ridged design is developed and then optimized by using the antenna design simulator software; CST Microwave Studio. The antenna parameters including the center frequency, frequency bandwidth and the antenna radiation pattern beam width are considered based on the requirements of OPIR applications. The final design is obtained for the center frequency of 2.785 GHz with a -10 dB bandwidth of at least 2.5 GHz. The final designed QRHA is able to provide a gain of 12.4 dB with a beam width of 36ᵒ at the center frequency of 2.785 GHz.
13 August 2025 in Microwave and Optical Technology Letters