In this work, a comprehensive equivalent circuit model (ECM) was developed for the a commercial 26650 LiFePO 4 /Li 4 Ti 5 O 12 cell in which the main processes at the anode and cathode electrodes and their contributions to the full-cell impedance were investigated and quantified separately. To unambiguously separate the anode and cathode processes, EIS spectra from Li 4 Ti 5 O 12 /Li and LiFePO 4 /Li half cells were modeled at different state of charge (SOC) and SOC history and the fit results were used to develop the full-cell ECM. The distribution of relaxation times (DRT) analysis was used in all cases to better resolve the frequencies of the processes, and thereby help their accurate identification. The LiFePO 4 /Li 4 Ti 5 O 12 -cell impedance was found to be significantly dependant on the SOC history, i.e. it changes slightly only at low SOCs during charge, whereas, it changes significantly during discharge. The SOC-dependence of the full-cell impedance was found to be mainly due to the decrease of the LiFePO 4 electrode’s charge transfer resistance with SOC increase. While Li 4 Ti 5 O 12 electrode processes did not show a significant change with SOC history, it was revealed that the SOC-histoty dependence of the LiFePO 4 /Li 4 Ti 5 O 12 full cell was also mainly due to the variation of charge transfer frequency and resistance of LiFePO 4 electrode.
Despite the challenges in achieving its full theoretical capacity of reversible extraction of two Li ions, the Li2FeSiO4 (LFS) cathode shows a remarkable cycling stability once its low electronic conductivity is addressed. By studying the local structure around the iron during electrochemical cycling using in situ x-ray absorption spectroscopy (XAS), it is possible to gain insight into the factors which determine the electrochemical properties of this material. In order to practically perform in situ XAS studies, the charge/discharge of LFS was maximized using two approaches: (a) reducing the particle size of LFS samples from micro-scale to nano-scale in order to reduce the diffusion path for intercalating ions; and (b) applying a conductive coating to each nanoparticle to facilitate electron transfer. A family of LFS materials was synthesized and characterized using x-ray diffraction, and scanning electron microscopy with energy dispersive analysis for structural and morphological analysis, as well as cyclic voltammetry and cycling tests for electrochemical performance diagnosis. This material was then characterized by in situ XAS. The results provide insight into the stable electrochemical performance of LFS and suggest new synthetic routes to reaching the theoretical capacity.