James Kratz

James Kratz

Auto-generated profile, based on publicly available information

James Kratz

University of Bristol

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 March 2012 in Journal of Composite Materials
Verified
Journal Article
Closed access
JKJames Kratz
James Kratz
KHKevin Hsiao
Kevin Hsiao
GFGoran Fernlund
Goran Fernlund
PHPascal Hubert
Pascal Hubert
Out-of-autoclave prepregs require a two-step cure cycle. The first step is a low temperature cure to consolidate the laminate and build sufficient green strength to proceed to the second step, a free-standing post-cure at traditional autoclave temperatures to fully cross-link the resin. Process modeling can help design a robust cure cycle to avoid scrapping large parts in production. The focus of this article is to develop the cure kinetics, viscosity, and glass transition temperature models for two commercially available out-of-autoclave epoxy resins. Since the cure kinetics model is the basis for all other thermal models, the cure kinetics model was validated using a one-dimensional heat transfer analysis on thick prepreg laminates. Finally, the out-of-autoclave resin models were compared to a traditional autoclave resin system to highlight the difference in resin reactivity for out-of-autoclave processing.

1 June 2013 in Composites Part A: Applied Science and Manufacturing
Verified
Journal Article
Closed access
JKJames Kratz
James Kratz
PHPascal Hubert
Pascal Hubert

1 August 2016 in Composites Part A: Applied Science and Manufacturing
Verified
Journal Article
Open access
CHChris Hunt
Chris Hunt
JKJames Kratz
James Kratz
IPIvana K Partridge
Ivana K Partridge
The effect of cure cycle on fracture behaviour of a commercial thermoplastic particle interleaved prepreg system was investigated. Laminates were manufactured at 700kPa in an autoclave using eight different thermal cycles that included both raising the cure temperature above the standard 180°C cure cycle and incorporating an intermediate dwell stage between 150 and 170°C prior to reaching the 180°C cure temperature. Double cantilever beam tests were conducted on specimens from the cured laminates. The stick–slip crack behaviour, observed in samples manufactured using the standard cure cycle, changed to stable crack growth when processing deviated by 10°C. The mode I fracture toughness values were reduced by 11–22% when incorporating an intermediate dwell stage before the final cure temperature. Scanning electron microscopy inspection of the fracture surfaces showed differences between samples made by standard cure cycles and those made using process deviations

3 February 2023 in Composites Part A: Applied Science and Manufacturing
Verified
Journal Article
Open access
DNDuc H. Nguyen
Duc H. Nguyen
XSXiaochuan Sun
Xiaochuan Sun
ITIryna Tretiak
Iryna Tretiak
MVMario A. Valverde
Mario A. Valverde
JKJames Kratz
James Kratz

1 February 2017 in Composite Structures
Verified
Journal Article
Open access
LBL.G. Blok
L.G. Blok
JKJ. Kratz
J. Kratz
DLD. Lukaszewicz
D. Lukaszewicz
SHS. Hesse
S. Hesse
Carwyn WardCarwyn Ward
Carwyn Ward
CKC. Kassapoglou
C. Kassapoglou
Fibre reinforced plastic (FRP) composite materials can provide superior specific energy absorption performance over conventional metallic structures if crush stability can be maintained during the impact event. The core in sandwich structures helps to stabilise the crush front by preventing global buckling, but delamination remains a barrier to optimal crushing performance. In this work, the in-plane crushing response of sandwich structures was improved by adding through-thickness reinforcement in the form of aramid fibre tufts. The effect of tufting different sandwich cores and facesheet orientations was investigated in both static and dynamic crushing modes. A drop-tower test rig was used to crush panels in realistic automotive crash conditions and a high-speed camera captured the crushing mechanisms. The through-thickness reinforcement improved the facesheet to core adhesion, resulting in a more localised and stable fracture of the facesheets. Tufting improved the specific energy absorption (SEA) from 11.5kJ/kg to 20.5kJ/kg and the crush force efficiency (CFE) from 0.22 to 0.55

1 March 2017 in Composites Part B: Engineering
Verified
Journal Article
Open access
JHJamie W. Hartley
Jamie W. Hartley
JKJames Kratz
James Kratz
Carwyn WardCarwyn Ward
Carwyn Ward
IPIvana K Partridge
Ivana K Partridge