A circular conformal array antenna (CAA) with beamsteering capabilities as well as omnidirectional performance at 3.5 GHz (S-band) is presented. The single radiating elements are formed by double-stacked microstrip patches placed on the planar faces of an octagonal holding structure fabricated with a 3D printer. An eight-way tunable feeding network (TFN) is designed, manufactured, and integrated into the conformal structure to excite the array elements. Novel tunable T-junctions (TTs) based on p-i-n diodes are proposed to form the TFN in microstrip technology. This novel T-junction allows a splitting configuration with uniform distribution to the two output ports or a switching mode to deliver the signal to either output port. In all T-junction operation modes, good input matching performance is achieved. The TFN network is integrated into the conformal antenna and digitally controlled by a microcontroller Arduino MEGA. A total of 29 states grouped in six modes with a global matching bandwidth of 17.2% can be selected. The omnidirectional radiation and beamsteered directional patterns (covering 360°) can be electronically tuned. The proposed antenna is suitable for future 5G terrestrial communications in the 3.5-GHz International Mobile Telecommunication (IMT) range, the primary candidate band for the first 5G networks.
22 August 2018 in IEEE Antennas and Wireless Propagation Letters
In this letter, additive manufacturing technologies have been evaluated for waveguide antenna array prototyping at Ku band. Direct metal laser sintering (DMLS) and stereolithography have been assessed in terms of manufacturing limitations, electrical performance, accuracy, cost and weight, compared with traditional manufacturing methods. This assessment is performed on a corporate-fed waveguide array antenna for end-user digital broadcast satellite communications at Ku band. The objective is to manufacture this intricate multilayer structure as a single block, in order to prevent contact and leakage issues in the interface between antenna layers. This monolithic implementation is unfeasible with conventional milling in aluminum, renowned in the literature for its reliability in waveguide antenna implementation. A prototype has been machined with such technique as a reference for experimental results. A single block fabrication has been possible by DMLS, presenting a similar performance to the reference prototype. Experimental results, including impedance matching, realized the gain and axial ratio have been performed on the antenna prototypes. A 14.7% effective bandwidth has been obtained for the DMLS antenna.
Two types of cost-efficient antennas based on dielectric gradient index dielectric lens have been designed for 5G applications at . The first is a linearly polarized flat lens antenna (LP-FLA) for terrestrial 5G communications. The second is a novel circularly polarized stepped lens antenna (CP-SLA) for 5G satellite services. An efficient design method is presented to optimize and conform the lens topology to the radiation pattern coming from the antenna feeder. The LP-FLA is fed by a traditional linearly polarized pyramidal horn antenna (PHA). The CP-SLA is fed by an open-ended bow-tie waveguide cavity (BCA) antenna. This cavity feeder (BCA), using cross-sections with bow-tie shapes, allows having circular polarization at the desired frequency bandwidth. The two types of presented antennas have been manufactured in order to verify their performance by an easy, low-cost, three-dimensional (3D) printing technique based on stereolithography. The peak realized gain value for the flat (LP-FLA) and stepped (CP-SLA) lens antennas have been increased at to and , respectively, by disposing the lens structures at the appropriated distance from the feeders. Likewise, using an array of horns (PHA) or open-ended bow-tie waveguide cavity (BCA) antenna feeders, it is possible to obtain a maximum steering angle range of 20° and 35°, for a directivity over and , in the planar and stepped lens antennas, respectively.
Two designs of conical-beam array antennas are presented for different fifth-generation applications. They are based on slotted cylindrical waveguides and a travelling-wave topology, where the waveguide is used to progressively excite a cross-slot array. A total of 384 cross-slots, formed by transversal and longitudinal slots, are grouped in rings of eight equally-spaced cross-slots. The propagation of TM 01 and TE 01 modes in the cylindrical waveguide can provide dual polarization by the independent excitation of transversal and longitudinal slots, respectively. Firstly, a dual linearly-polarized antenna design in the 37-40 GHz band is presented, conforming a high-gain conical-beam pattern. Secondly, a similar antenna design working in the 5G dual-band of 26-30 GHz and 37-40 GHz is also presented. In this last case, transversal and longitudinal slots are designed to radiate at two different frequency bands of 26-30 GHz (vertical polarization) and 37-40 GHz (horizontal polarization), recently assigned for very high-speed 5G applications. The dual-band design has been prototyped by combining 3D-printing and CNC milling techniques to experimentally validate the proposed topology, providing high experimental performance. Directive tilted omnidirectional coverages with peak realized gains around 14 dBi have been obtained, as well as a total efficiency between 83% and 90% for both frequency bands.
3 February 2020 in IEEE Transactions on Antennas and Propagation
A high-gain conical-beam travelling-wave array antenna based on a slotted circular waveguide is designed at the higher part of Ku-band. The single radiating element is formed by a ring of eight equally spaced slots fed by a circular waveguide. The excitation of the non-fundamental TM01 mode provides a uniform feeding distribution to each slot, generating an omnidirectional radiation performance. Thus, an array antenna formed by 48 rings of slots is proposed following the design rules of travelling-wave arrays. Every ring is properly designed to achieve a uniform power distribution and consequently maximum directivity for the array antenna performance. The distance between elements is also adjusted to obtain the better input matching response and mitigate the grating lobe appearance, generating a high-gain conical-beam radiation performance suitable for satellite and fifth-generation communications. The proposed antenna design has been manufactured in plastic material by using a 3D printing process and plated by a spray metallization process. A -10 dB impedance bandwidth higher than 23%, high-gain values around 13.5 dB or total efficiency higher than 98% have been achieved for the whole frequency band.
31 August 2020 in IEEE Transactions on Antennas and Propagation
In this communication, the design and fabrication of a Ku-band antenna array is presented for dual circular polarization, using a corporate feeding network (CFN) with orthogonal dual-mode operation. A four-way CFN in square waveguide technology is implemented to uniformly illuminate the antenna array. Each of the two propagating modes in the square waveguide excites orthogonal polarizations in the antenna. A dual circularly polarized radiating element is used for the dual-polarized array. Consequently, the link capacity can be doubled by using orthogonal polarizations in a compact and low-loss antenna system. Prototypes have been fabricated by conventional machining and they have been experimentally tested. A 90% total efficiency and matching coefficient better than -10 dB have been obtained in the frequency band between 16.5 and 17.5 GHz for the dual circularly polarized antenna. Further simulations have proven the validity of this topology for larger dual-polarized planar arrays.