9 January 2023 in IEEE Transactions on Instrumentation and Measurement
To solve the problem of time-consuming, laborious and low accuracy in magnetic map construction, a trajectory guided two-dimensional magnetic map construction method is proposed in this paper. The absolute displacement calculated by the inertial navigation system is mapped to the real trajectory to construct the magnetic map. The precision of the constructed magnetic map can reach 0.1141 m, and the mapping efficiency is greater than 1800 m2/h. Moreover, the cost of sensor is only $15.4. To deal with the instability problem that the traditional particle filter in PDR suffers from, this paper proposes an integrated particle filter algorithm. The algorithm uses two assumptions: 1. All noises obey Gaussian distribution; 2. The initial position and the results obtained from integrated particle filter are reliable enough. The particle distribution in the case of infinite particles is simulated, and similar particles are integrated. The algorithm breaks through the limit of particle number of particle filter and greatly reduces the randomness of particle filter algorithm. The real-world experiments show that the proposed positioning method can achieve an average positioning error of 0.32m.
13 October 2022 in IEEE Transactions on Instrumentation and Measurement
In this paper, based on the study of Linear Frequency Modulated Continuous Wave (LFMCW) radar, a ranging algorithm for the high-precision liquid level measurement in industry is proposed. A new algorithm is developed based on the MacLeod algorithm. The frequency offset δ 0 is estimated, and then (δ 0 -q, δ 0 +q) is used as the iterative estimation initial iteration interval to determine the frequency offset δ 0 more precisely. The improved algorithm is the Golden-MacLeod algorithm, referred to as the GM algorithm. Simulation results show that the GM can effectively reduce the estimation error and maintain the high frequency estimation accuracy at signal-to-noise ratio (SNR) up to -10 dB, which is better than the MacLeod algorithm. In addition, the estimation accuracy, stability and noise immunity are better than other algorithms in the variation interval of SNR greater than -5 dB. Liquid level measurement experiment is tested by TI’s IWR 6843ISK and DCA1000EVM. The measurement results also show that the measurement accuracy of the GM can meet the requirements of industrial applications. This also proves the reliability of the GM in practical applications.
9 August 2023 in IEEE Transactions on Instrumentation and Measurement
This paper proposed an autonomous multi-frame fusion method of millimeter wave (mmWave) radar point cloud suitable for low crowd density indoor scenes to overcome the problem of sparse target points in the application of frequency modulated continuous wave (FMCW) radar in indoor 4D point cloud imaging. Without other sensors, in the static or translational state of the radar, the static and dynamic target points in the radar field of vision are distinguished through multiple velocity iterations, and then the static target points are used to estimate the velocity of the radar itself. By calculating the displacement of the radar within a frame time, we carry out velocity filtering on the point cloud to remove the target points with large differences. Finally, the radar point cloud data of each frame is converted to the same geographic coordinate system to achieve 4D point cloud multi-frame fusion. The experimental results show that the presented method can accurately estimate the velocity of the radar and correct the coordinates of each frame point cloud. According to the imaging results, the proposed algorithm can greatly increase the imaging density of point cloud without defocusing, which improves the accuracy and readability of point cloud image with the imaging ability of static and moving targets.
3 October 2024 in IEEE Transactions on Instrumentation and Measurement
Current smartphone-based step detection algorithms do not comprehensively consider the randomness of user movements in daily life, such as carrying smartphone in various postures, false walking, and walking in various gaits. To overcome the problem, this paper proposes a novel step detection algorithm based on Complete Ensemble Empirical Mode Decomposition with Adaptive Noise Hilbert Transform (CEEMDAN-HT). Firstly, the CEEMDAN Partial Reconstruction (CEEMDAN-PR) algorithm is presented to reduce noise for inertial data. In order to compensate the step count misdetection due to the mix-postures. Secondly, we combine Support Vector Machine (SVM) with CEEMDAN energy entropy for accurate identification of user movement state and smartphone carrying posture. This approach addresses the issue of false walking and selects appropriate step detection strategies for different scenarios. Finally, HT is used to obtain instantaneous phase information from inertial data for step detection. This approach is capable of adapting to mixed-gaits and mixed-postures without complex threshold settings. Experiment results show that its superior performance, achieving 98.10% average accuracy in free walking and 93.85% in false walking scenarios.
16 August 2024 in IEEE Internet of Things Journal
People’s need for positioning and navigational data has grown over time as communication technology has advanced, becoming an essential and significant aspect of daily life. As a result of the Global Navigation Satellite Systems (GNSS) increasing maturity, satellite positioning technology can now achieve the highest centimeter-level positioning accuracy, effectively meeting the majority of outdoor positioning requirements. However, indoor positioning technology emerged as a solution for locations where satellite signals are obstructed and cannot normally provide positioning information. Researchers have focused on the Bluetooth positioning algorithm among them because it is a wireless positioning method. There are two types of traditional Bluetooth Received Signal Strength Indicator (RSSI) positioning methods based on the Internet of Things (IoT): trilateral and multilateral. However, because environmental interference causes the Bluetooth signal’s RSSI value to fluctuate greatly, using either of the above methods will result in significant errors and a decline in positioning accuracy when buildings, objects, or people are in the way. To address this issue, this paper proposes preprocessing the data prior to applying the least squares method. At the same time, based on processing outcomes, the weighted least squares method is utilized to determine Bluetooth RSSI positioning, resulting in a notable improvement over the accuracy of the traditional RSSI Bluetooth positioning.