Electrochemical impedance spectroscopy (EIS) is a widely employed non-invasive detection technique for battery state estimation and fault diagnosis. This article introduces a novel multi-sinusoidal pulse-width modulation (MSPWM) excitation for the purpose of online battery impedance spectroscopy identification. The introduced excitation is a unique form of broadband binary excitation that enables precise design of the amplitude and phase for every fundamental component, which can meet customized measurement requirements. Furthermore, the article proposes a method to inject the MSPWM excitation into cells and conduct online EIS measurements using reconfigurable battery systems (RBSs). Through modulation of the battery pack’s charging or discharging current during regular operations, without the need for an additional external programmable power supply, the MSPWM excitation can be injected into the RBS cells, facilitating impedance measurement without interrupting the normal operation of the system. To validate the proposed method, a DC RBS consisting of 16 lithium-ion battery cells was constructed. The experimental results show strong consistency between the EIS measurements conducted using the proposed method and those obtained from a commercial electrochemical workstation.
27 February 2024 in IEEE Transactions on Power Electronics
This article presents a hierarchical balancing architecture for the dc reconfigurable battery pack (RBP) with a modular design. The battery cells in the RBP are divided into several modules, and each module is equipped with a slave controller that is only responsible for a subset of cells. The system controller performs the closed-loop control and allocates the desired voltage steps into battery modules. The proposed architecture can significantly reduce communication and computation requirements for large-scale applications. Moreover, considering the second-harmonic current (SHC) widely existing in a single-phase dc/ac system, which may induce the aging of battery cells, the dc RBP is used to suppress the SHC for the first time without an additional central dc/dc converter. Due to the high output voltage quality and low-frequency operation of the dc RBP, the filter size can be significantly reduced. Experimental validation of the proposed control scheme is demonstrated through the utilization of a dc RBP comprising 48 3-Ah 18 650 lithium-ion cells. The experimental results demonstrate that the proposed method achieves effective battery cell balancing and SHC suppression.
6 November 2025 in International Journal of Circuit Theory and Applications