1 February 2023 in Physics of Fluids
The dynamic behavior of droplets in the impingement process with particles has attracted extensive interest due to its widespread industrial applications. In this study, collision experimentation was carried out to investigate the spatial and temporal variation of droplets on a target particle surface by utilizing high-speed photography. Energy conversion and force analysis were conducted through theoretical analysis. Moreover, we captured the microscopic and evolutionary features of droplets in detail by image processing. The dimensionless liquid film thickness in the maximum spreading state is primarily determined by its spreading area. The Weber number can be used to calculate the maximum spreading area of droplets for liquids with a specific viscosity and droplet-to-particle size ratio. The time-evolved liquid film morphology and spreading area of a highly viscous liquid show a different trend compared to that of the low-viscous liquid. When the liquid film is not broken, the maximum dimensionless spreading area is linearly related to the Weber number. At low Weber numbers and high Reynolds numbers, droplets exhibit more pronounced oscillation characteristics. The oscillation period of the collision is related to the droplet-to-particle size. The liquid film thickness decreases as the Weber and Reynolds numbers rise. As for the low-viscous liquid, a low Weber number leads to a periodic change in the dynamic contact angle. A decrease in the Reynolds number for the highly viscous droplets generates a greater dynamic contact angle. The recoiling of the liquid film results in a more significant reduction in the dynamic contact angle.
1 March 2023 in Physics of Fluids
Understanding droplet–particle collision behaviors is essential for the pyrohydrolysis process of pickling liquor, where the pickling liquor is sprayed and dried into particles. This study systematically investigated the collision characteristics between a viscous droplet and a heated stainless steel particle whose temperature ranged from 100 to 700 °C. The results indicate that the vapor thrust promotes droplet rebound in smaller spreading diameters but induces disintegration in larger spreading diameters under the film boiling regime. The collision regime map is summarized, and the transition thresholds of collision patterns are significantly increased with increasing liquid viscosity. The spreading factor and contact line velocity are strongly affected by the particle temperature at high liquid viscosities. In addition, the hydrophobic nature of particle surface in film boiling regime is favorable for droplet spreading. The dynamic contact angle significantly depends on the particle temperature and droplet properties. The dimensionless contact time shows a power law dependency on the Weber number in the rebound pattern, but it is almost a constant in the disintegration pattern.
2 February 2024 in Applied Thermal Engineering
1 May 2024 in Physics of Fluids
In this study, the dynamic behavior of shear-thinning droplets impacting on a hydrophobic spherical surface is numerically investigated using the volume of fluid method coupled with dynamic contact angle and a power-law model. The differences in dynamic behaviors between shear-thinning and Newtonian droplets are first studied. By analyzing the distribution of pressure and shear rate inside the droplet, it is found that the shear-thinning behavior of the droplets leads to an uneven distribution of apparent viscosity upon impact, which in turn prevents droplet rebound. The effects of various impacting conditions, such as apparent viscosity, impact velocity, surface tension and dynamic contact angle, on the spreading factor and liquid film thickness of shear-thinning droplets are investigated. According to the behaviors of droplets, the impacting process can be divided into three phases: (I) initial deformation, (II) inertia-dominated, and (III) viscosity-dominated phases. In order to reveal the physical mechanisms that prevent shear-thinning droplets from rebounding on the hydrophobic particle surface, the conversion of kinetic energy, viscous dissipation, surface energy, and potential energy during the three phases of the impact process is also analyzed in detail.
15 July 2025 in Combustion and Flame