16 September 2023 in Water Resources Management
1 August 2008 in Journal of Irrigation and Drainage Engineering
Block ramps represent structures that produce high energy dissipation and have a unique characteristic of preserving the ecological balance in a river restoration project. The energy dissipation of a block ramp changes with the tailwater level. In this technical note the relative energy dissipation in submerged flow conditions has been investigated. The experiments were conducted at the Hydraulic Laboratory of the University of Pisa, Pisa, Italy on ramps characterized by different block materials, submergence conditions, and ramp slopes. The study shows that the relative energy loss, varying the hydraulic jump location on the ramp, is essentially a function of the scale roughness, the ramp slope, the ratio between the critical water depth, and the ramp height and the ratio between the ramp length and the reduced length in submerged conditions. The differences in energy dissipation for a submerged hydraulic jump in different bed conditions are also investigated.
1 November 2008 in Canadian Journal of Civil Engineering
This paper presents an experimental investigation of the flow resistance in long chutes with a slope of up to 9% and large-scale roughness. Rock chutes generally have steep slopes and the presence of large rocks induces great resistance to the flow. The chute bed was characterized by different sizes of crushed stones with protruding boulders. The proposed relationship correlates the flow resistance in terms of the Darcy–Weisbach friction factor with and without protruding boulders. The proposed logarithmic law is a function of the relative submergence, the slope, and the boulder concentration. A comparison of the data calculated using the proposed logarithmic law with those from earlier experiments shows a reasonable agreement in the tested experimental range.
6 July 2018 in Arabian Journal for Science and Engineering
3 May 2024 in Environmental Development
4 September 2015 in Arabian Journal for Science and Engineering