Pauline Souloumiac

Pauline Souloumiac

Auto-generated profile, based on publicly available information

Pauline Souloumiac

CY Cergy Paris Université, Laboratoire Géosciences et Environnement Cergy (GEC), 1, rue Descartes, 95000 Neuville-sur-Oise, France

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications

9 June 2019 in Geosciences
Verified
Journal Article
Open access
PDF file
RRRomain Robert
Romain Robert
PSPauline Souloumiac
Pauline Souloumiac
PRPhilippe Robion
Philippe Robion
CDChristian DAVID
Christian DAVID
Knowledge of the paleo-stress distribution is crucial to understand the fracture set up and orientations during the tectonic evolution of a basin, and thus the corresponding fluid flow patterns in a reservoir. This study aims to predict the main stress orientations and evolution during the growth of a fold by using the limit analysis method. Fourteen different steps have been integrated as 2D cross sections from an early stage to an evolved stage of a schematic and balanced propagation fold. The stress evolution was followed during the time and burial of syn tectonic layers localized in front of the thrust. Numerical simulations were used to predict the occurrence and orientation of deformation bands, i.e., compaction and shear bands, by following the kinematic of a fault-propagation fold. The case study of the Sant-Corneli-Boixols anticline was selected, located in the South Central Pyrenees in the Tremp basin, to constrain the dimension of the starting models (or prototypes) used in our numerical simulations. The predictions of the numerical simulations were compared to field observations of an early occurrence of both pure compaction- and shear-enhanced compaction bands in the syn-tectonic Aren formation located in front of the fold, which are subjected to early layer parallel shortening during the burial history. Stress magnitude and stress ratio variations define the type of deformation band produced. Our results show that the band occurrence depends on the yield envelope of the host material and that a small yield envelope is required for these shallow depths, which can only be explained by the heterogeneity of the host rock facies. In our case, the heterogeneity can be explained by a significant contribution of carbonate bioclasts in the calcarenite rock, which change the mechanical behavior of the whole rock.

10 December 2018 in Solid Earth
Verified
Journal Article
Open access
PDF file
JMJessica McBeck
Jessica McBeck
MCMichele Cooke
Michele Cooke
PSPauline Souloumiac
Pauline Souloumiac
BMBertrand Maillot
Bertrand Maillot
BMBaptiste Mary
Baptiste Mary
Tracking the evolution of the deformational energy budget within accretionary systems provides insight into the driving mechanisms that control fault development. To quantify the impact of these mechanisms on overall system efficiency, we estimate energy budget components as the first thrust fault pair develops in dry-sand accretion experiments. We track energy budget components in experiments that include and exclude a basal layer of glass beads in order to investigate the influence of detachment strength on work partitioning. We use the measurements of normal force exerted on the backwall to estimate external work, and measurements of strain observed on the sides of the sand packs to estimate the internal work, frictional work and work against gravity done within increments of each experiment. Thrust fault development reduces the incremental external work and incremental internal work, and increases the incremental frictional work and incremental gravitational work. The faults that develop within higher-friction detachment experiments produce greater frictional work than the faults in experiments with glass bead detachments because the slip distribution along the detachments remains the same, while the effective friction coefficient of the detachment differs between the experiments. The imbalance of the cumulative work budget suggests that additional deformational processes that are not fully captured in our measurements of the energy budget, such as acoustic energy, consume work within the deforming wedge.

27 March 2023 in BSGF - Earth Sciences Bulletin
Verified
Journal Article
Open access
PDF file
TCTyphaine Caër
Typhaine Caër
BMBertrand Maillot
Bertrand Maillot
PLPascale Leturmy
Pascale Leturmy
PSPauline Souloumiac
Pauline Souloumiac
CNChristophe Nussbaum
Christophe Nussbaum
Field observations and seismic interpretations testify that the front of the Jura fold-and-thrust belt is still submitted to compressive deformation, but whether the basement is deforming (thick-skinned) or not (thin-skinned) is an active question. We propose a mechanical point of view using the Kinematic approach of the Limit Analysis theory (KLA). We first draw cross-sections containing a major shallow décollement level in the Triassic evaporites, including the Alps up to the topographic maximum and including the whole crust. We submit the cross-sections to a compressive force at their southern end, and the KLA determines the location and geometry of the incipient ruptures by optimisation of the associated compressive force, accounting for force balance and for the rock strength (Coulomb criterion). Five cross-sections span the whole Jura from west to east, allowing us to explore the lateral variations. From the analysis of 500 simulations (100 for each cross-section), varying the friction angles of the Triassic décollement and of the lower crust between 1° and 10°, we have identified five types of tectonics at the Jura front depending on the emergence of a basement thrust beyond the Jura front (type 1), at the Jura front (type 2) with simultaneous activation of the shallow décollement (type 3), or south of the Jura front (type 5), with activation of the shallow décollement at the Jura front (type 4). The analysis allows us to draw two conclusions. First, the transitions between the various tectonic styles occur abruptly upon continuous changes in the friction parameters, revealing a threshold behaviour that we interpret as an extension of the concept of wedge criticality in the Critical Coulomb Wedge theory: at criticality, several tectonic types may occur within a narrow, critical range of parameter values. Second, the critical range evolves systematically between cross-sections, in such a way that the front of the thick-skinned deformation crosses laterally the Jura belt. The two most western cross-sections exhibit only thin-skinned or no tectonics at the Jura front (types 1, 4 and 5), the central one hosts all five styles, and the two Eastern ones show thick-skinned solutions (types 1, 2 and 3), for all values tested. We also show that a thick-skinned tectonic style can be accompanied by a simultaneous activation of the shallow Triassic décollement (type 4), complicating the interpretation of apparent thin-skinned field structures. Overall, our simulations yield tectonic styles compatible with natural seismicity and GPS data for values of the lower-crust friction angle below 3 to 7°. Modifications of our cross-sections to explore the effect of a bumpy upper/lower crust interface, or of a major décollement at the upper/lower crust interface, or of higher cohesion values, show that the numerical outcomes are rather robust. They only slightly modify the critical ranges at which the tectonic changes occur. These findings may serve as guides, or first order questions, for more sophisticated mechanical approaches including temperature and rate-dependent rheologies and the three dimensions of space that are necessary to capture the competition between compressive and strike-slip tectonic modes.

1 January 2022 in SSRN Electronic Journal
Verified
Preprint
Open access
PDF file
SVSarah Visage
Sarah Visage
PSPauline Souloumiac
Pauline Souloumiac
NCNadaya Cubas
Nadaya Cubas
BMBertrand Maillot
Bertrand Maillot
SASolène Antoine
Solène Antoine
YKYann Klinger
Yann Klinger
Surface deformation associated with strike-slip faults can be distributed in space, with deformation located either along the primary fault strand or around it and referred to as off-fault deformation (OFD). Fault displacement hazard models require to identify and estimate surface slip rates along active fault strands. In this study, we investigate the development of OFD with increasing cumulative deformation using analogue models. From the experimental surface displacement field, we confirm previous observations made on analogue models that the surface deformation goes through a stage of (1) wide diffuse deformation followed by (2) the formation of Riedels faults, then (3) synthetic shears emerge in between Riedels to interact and finally (4) produce fault strands alternating with relay zones and may be abandoned and reactivated. OFD is located first between Riedels, then between synthetic shears, and finally takes place in the relay zones. We also show that the OFD initially accommodate 100\% of the applied slip (no faults), then decreases abruptly during the Riedels stage down to 20 to 30\% to finally remain stable for the rest of the experiment. The abandonment and reactivation of the relay zones has the consequence of maintaining the OFD ratio on a plateau. Our experiments show that, like the OFD ratio, the width of the fault zone decreases with cumulative displacement to reach a plateau. Consequently, the OFD is correlated with this fault zone width and its geometric complexities. The ratio of OFD observed in this study are also consistent with measurements of OFD made on seven natural faults that exhibit different cumulative displacements. Hence our models suggest that strike-slip faults will never reach a continuous, linear geometry, and will always maintain a minimum of amount of OFD.

9 December 2024 in Solid Earth
Verified
Journal Article
Open access
PDF file
AAAnthony Adwan
Anthony Adwan
BMBertrand Maillot
Bertrand Maillot
PSPauline Souloumiac
Pauline Souloumiac
CBChristophe Barnes
Christophe Barnes
CNChristophe Nussbaum
Christophe Nussbaum
TSThomas Van Stiphout
Thomas Van Stiphout
This study employs numerical simulations based on the limit analysis (LA) method to calculate the stress distribution in a model that includes a basal detachment, featuring the lateral termination of a generic fault under compression. We conduct 2500 2D and 500 3D simulations with varying basement and fault friction angles to analyze and classify the results into clusters representing similar failure patterns to understand the stress fields. Automatic fault detection methods are employed to identify the number and positions of fault lines in 2D and fault surfaces in 3D. Clustering approaches are utilized to group the models based on the detected failure patterns. For the 2D models, the analysis reveals three primary clusters and five transitional ones, qualitatively consistent with the critical Coulomb wedge theory and the influence of inherited structural and geometric aspects over rupture localization. In the 3D models, four different clusters portray the lateral prolongation of the inherited fault. High stress magnitudes are detected between the compressive boundary and the activated or created faults and at the root of the inherited active fault. Tension zones appear near the outcropping surface relief, while stress decreases with depth at the footwall of the created back thrusts. A statistical cluster-based stress field analysis indicates that for a given cluster, the stress field mainly conserves the same orientations, while the magnitude varies with changes in friction angles and compressive field intensity, except in failure zones where variations are sparse. Small parametric variations could lead to significantly different stress fields, while larger deviations might result in similar configurations. The comparison between 2D and 3D models shows the importance of lateral stresses and their influence on rupture patterns, distinguishing between 3D analysis and 2D cross-sections. Lastly, despite using small-scale models, stress field variations over a span of a couple of kilometers are quite large.