We report, for the first time to our knowledge, femtosecond pulse generation from a graphene mode-locked Cr:ZnSe laser at 2500 nm. To minimize the insertion losses at the lasing wavelength, high-quality monolayer graphene transferred on a substrate was used in the experiments. Once mode-locking was initiated, the laser generated a stable train of 226 fs pulses with a time–bandwidth product of 0.39. The mode-locked laser operated at a pulse repetition rate of 77 MHz and produced 80 mW output power with an incident pump power of 1.6 W. To our knowledge, this is the longest laser wavelength at which graphene-based passive mode-locking has been demonstrated to date.
Colloidally stable and highly luminescent near-IR emitting Ag2S quantum dots (NIRQDs) were prepared by a very simple aqueous method using 2-mercaptopropionic acid (2MPA) as a coating. Emission of Ag2S-2MPA NIRQDs can be tuned between 780 and 950 nm. These NIRQDs have photoluminescence quantum yields (PLQY) around 7–39% and exhibit excellent cytocompatibility even at 600 μg mL−1 in NIH/3T3 cells. With such improved properties, Ag2S-2MPA NIRQDs have a great potential in practical bio-applications.
We describe a cw Kerr-lens mode-locked :ZnSe laser pumped by a 1800 nm thulium fiber laser. The astigmatically compensated asymmetric x cavity contained a 2.4-mm-long :ZnSe sample with a pump absorption coefficient of and was operated with a 1% output coupler. The dispersion compensation was achieved by using a prism pair. During Kerr-lens mode-locked operation, we could generate 95 fs pulses at a pulse repetition rate of 94.3 MHz and with 40 mW of output power. The center wavelength of the pulses was 2420 nm. The pulses had a spectral width of 69 nm and a time–bandwidth product of 0.335, which is close to the transform limit for hyperbolic secant pulses.
We report, for the first time to our knowledge, the demonstration of a graphene supercapacitor as a voltage-controlled saturable absorber for femtosecond pulse generation from a solid-state laser. By applying only a few volts of bias, the Fermi level of the device could be shifted to vary the insertion loss, while maintaining a sufficient level of saturable absorption to initiate mode-locked operation. The graphene supercapacitor was operated at bias voltages of 0.5–1V to generate sub-100 fs pulses at a pulse repetition rate of 4.51 MHz from a multipass-cavity :forsterite laser operating at 1255 nm. The nonlinear optical response of the graphene supercapacitor was further investigated by using pump–probe spectroscopy.
Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.