Chern Yang Leong

Chern Yang Leong

Auto-generated profile, based on publicly available information

Chern Yang Leong

Photonics Research Institute, Department of Electrical and Electronic Engineering, The Hong Kong Polytechnic University, Hong Kong

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 November 2020 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
LHLin Htein
Lin Htein
DGDinusha Gunawardena
Dinusha Gunawardena
CLChern Yang Leong
Chern Yang Leong
HTHwa-Yaw Tam
Hwa-Yaw Tam
We report for the first time the development of a rectangular fiber with two cores consisting of different refractive indices for discrimination of temperature effects during strain or curvature measurements using fiber Bragg gratings written in a single segment of a fiber. Two cores with a diameter of 8 μm and a rectangular cladding with dimensions of 120 μm× 255 μm permit convenient splicing to conventional single mode fiber and support easy identification of the orientation of the fiber. When placed in a desired orientation, each core of the two-core rectangular fiber experiences a different spectral shift in the presence of applied strain or curvature. The sensitivities of the two cores are 0.87 and 1.08 pm/με for strain, 126 and.−128 pm/m−1 for curvature and 10.05 and 10.40 pm/°C for temperature, respectively. In addition, the flat cladding structure of the fiber provides a large physical contact area between the sensing fiber and the substrate than a circular fiber and allows better strain coupling between the object and the fiber.

18 December 2023 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
CLChern Yang Leong
Chern Yang Leong
Xin CHENGXin CHENG
Xin CHENG
JCJingxian Cui
Jingxian Cui
DGDinusha Gunawardena
Dinusha Gunawardena
HTHwa-Yaw Tam
Hwa-Yaw Tam
This paper presents a polymeric optical fiber-based tactile sensitive artificial skin designed for the replication of touch on a robotic finger surface. The artificial skin integrates a polymer optical fiber, inscribed with an array of four fiber Bragg gratings, inside a 2-mm thick silicone membrane to enable simultaneous detection of force magnitudes and contact localization around the sensing region. The presented skin was fabricated by utilizing the dimensions of a human index fingertip where a four-axis electronic platform was used to replicate the force exertion on the skin over an indenter of 2 mm in diameters. A machine learning algorithm, random forest regression, was employed to estimate force magnitude and contact location by analyzing the wavelength shift of the four FBGs. The proposed POF-based artificial skin is equipped with high-resolution force sensing capability, especially in confined areas while offering simple fabrication and good scalability for large area tactile sensing on curved and complex surfaces. These results demonstrate that the proposed skin is suitable for large area sensorization on robots to achieve dexterous object manipulations and explorations.

7 October 2023 in Optics and Lasers in Engineering
Verified
Journal Article
Closed access
JCJingxian Cui
Jingxian Cui
DGDinusha Serandi Gunawardena
Dinusha Serandi Gunawardena
XCXin Cheng
Xin Cheng
LHLin Htein
Lin Htein
CLChern Yang Leong
Chern Yang Leong
HTHwa-Yaw Tam
Hwa-Yaw Tam

5 March 2026 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
JCJingxian Cui
Jingxian Cui
LHLin Htein
Lin Htein
CLChern Yang Leong
Chern Yang Leong
LLLinyue Lu
Linyue Lu
SGSoon Xin Gan
Soon Xin Gan
HTHwa-Yaw Tam
Hwa-Yaw Tam
This work presents a compact fiber Bragg grating (FBG)-based sensor that decouples curvature/strain and temperature effects using a configurable rectangular optical fiber design. The sensor structure integrates a side-hole rectangular fiber (SHRF) with dimension of 175 μm × 358 μm with a 97-μm diameter air hole, along with embedded reduced-cladding fibers (RCFs). It features two FBGs, one inscribed in the SHRF, which is sensitive to both curvature/strain and temperature, and another within an RCF embedded in the air hole, which serves as a temperature reference. The design accommodates both reduced-cladding silica optical fiber (RC-SOF) and reduced-cladding polymer optical fiber (RC-POF), with the RC-POF exhibiting significantly enhanced temperature sensitivity (−43.64 pm/°C in the range 20–80 °C), four times greater than that of the SHRF (11.04 pm/°C), enabling precise thermal discrimination. Experimental results demonstrate a curvature sensitivity of −0.26 nm/m−1, an axial strain sensitivity of 0.89 pm/μϵ, and a bending-induced strain sensitivity of 1.09 pm/μϵ for the SHRF. The embedded RCFs show negligible curvature/strain response, with the RC-SOF exhibiting 10.70 pm/°C sensitivity (50–180 °C). The SHRF's flat cladding enables clear orientation identification and enhances strain transfer/bonding. This all-fiber design provides thermal compensation without requiring complex packaging or separate reference elements.

20 August 2025 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
LHLin Htein
Lin Htein
JCJingxian Cui
Jingxian Cui
CLChern Yang Leong
Chern Yang Leong
HTHwa-Yaw Tam
Hwa-Yaw Tam
We present a compact, multi-directional force sensor based on a novel 8-shaped fiber inscribed with a fiber Bragg grating, designed to overcome the limitations of conventional force sensors in sensitivity, size, and directional discrimination. The 8-shaped fiber features two channels with (waist: 43.3 μm) and an elliptical core (minor/major axes: 4.6/22.5 μm). When subjected to normal forces along the minor and major axes, sensitivities of 85.81 and 31.06 pm/N were achieved, respectively. Shear force evaluation on a 15° inclined plane revealed sensitivities of 209.17 (minor axis) and 123.53 pm/N (major axis). This design eliminates the need for complex polymer embedding, offering a twofold improvement in both normal force sensitivity and shear force sensitivity compared to a sensor utilizing conventional single-mode fiber. This innovative sensor demonstrates precise detection of applied forces, enabling exceptional directional sensitivity, making it a valuable instrument for applications requiring accurate force measurement and monitoring in specific orientations.

12 September 2025 in IEEE Sensors Journal
Verified
Journal Article
Closed access
SGSoon Xin Gan
Soon Xin Gan
JCJingxian Cui
Jingxian Cui
CLChern Yang Leong
Chern Yang Leong
JCJing Wen Chew
Jing Wen Chew
Xin CHENGXin CHENG
Xin CHENG
HTHwa-Yaw Tam
Hwa-Yaw Tam
Polymer long period gratings (LPGs) exhibit superior flexibility and durability compared to conventional silica-based counterparts, allowing for reliable performance in dynamic environments and broadening fabrication options. This study presents the fabrication of LPGs in single-mode polymer optical fibers (POFs) made of ZEONEX, a cyclo-olefin polymer, through mechanical compression. LPGs with grating length ranging from 20 mm to 40 mm were produced in 70 μm and 110 μm cladding-diameter fibers via mechanical compression techniques. Key findings reveal that mechanical compressed LPGs require minimal force (2.2–3.4 N) to achieve significant resonance dips with attenuation up to 26.2 dB, along with strain-dependent spectral tunability of 1.64–1.74 pm/με. Also, permanent mechanically produced LPGs were created by heating the POF during compression, exhibiting resonance strength of 15–20 dB and insertion loss of 2–3 dB. Spectral tunability of 1.66–1.85 pm/με and temperature sensitivity of 1.336–1.575 nm/°C were achieved. Furthermore, permanent LPGs in 110-μm fibers demonstrate a surrounding refractive index (SRI) sensitivity of 236.6 nm/RIU at ~1.4441 threshold, while 70-μm fiber LPGs display linear SRI response (47.3–49.6 nm/RIU) across wide SRI range (1.34–1.45), highlighting their versatility. These results establish POFs as promising platforms for tunable and highly versatile LPG-based sensors, with mechanical compression offering a high-performance alternative to laser-based methods for diverse sensing applications.