19 April 2017 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
In this paper, we present a high-density four-transistor (4T) static random access memory (SRAM) bitcell design for 3-D CoolCube technology platform based on 14-nm fully depleted - silicon on insulator MOS transistors to show the compatibility between the 4T SRAM and the 3-D design and the considerable density gain that they can achieve when combined. The 4T SRAM bitcell has been characterized to investigate the critical operations in terms of stability (retention and read) taking into account the postlayout parasitic elements. Thus, failure mechanisms are exposed and explained. Based on this paper, a data-dependent dynamic back-biasing scheme improving the bitcell stability is developed. A specific read-assist circuit is also proposed in order to enable a large number of bitcells per column in a memory array. Finally, the designed bitcell offers up to 30% area gain compared to a planar six-transistor SRAM bitcell in the same technology node.
18 February 2019 in IEEE Solid-State Circuits Letters
This paper presents a single-rail two-port static random-access memory (SRAM) designed in 28 nm FD-SOI technology specifically for a synchronous/asynchronous IoT node. This SRAM supports an asynchronous interface communication and a fast transition sleep/active mode. It enables simultaneous synchronous and asynchronous accesses on its two independent ports, as well as a selective virtual ground (SVGND) to support ultra-low voltage (ULV) in read operations. Measurements on a 64 kbits memory macro prove the functionality for a supply voltage ranging from 0.25 V to 1.25 V. The sleep mode enables 158x reduction of the SVGND static-power consumption. The SVGND read assist achieves a gain of 50 mV on the read port operations lowest voltage. The memory achieves, at 0.25 V and 27∘C, an average energy cost per access of 1.45 fJ/bit at 451 kHz and a leakage of 25 pW/bit in sleep mode.