1 April 2018 in Computers and Geotechnics
10 August 2020 in Bulletin of Engineering Geology and the Environment
1 October 2019 in Geosynthetics International
This study presents a series of numerical analyses investigating the impact of rainfall on the performance and design of geosynthetic-reinforced soil slopes (RSSs). The importance of considering regional hydrological conditions for designs of RSSs, particularly when marginal soil is used as backfill, is demonstrated and highlighted. RSSs with backfills containing five different fines contents subjected to various combinations of initial hydraulic conditions and major rainfall events were modeled. The input rainfall was determined from the rainfall intensity–duration–frequency (I–D–F) curves to realistically account for the impact of regional hydrological conditions. The hydraulic responses and stability of the RSSs including their porewater pressure development and factor of safety were then evaluated and compared. The results revealed that the applied rainfall scenarios had little influence on the performance of RSSs with high-quality backfills (i.e. backfill with low fines content), whereas those with prolonged rainfall duration substantially affected the performance of RSSs with high fines content backfills. Rainfall thresholds were established for the RSSs with various backfills and initial conditions and compared with the regional I–D–F curves to provide a simplified and robust method for facilitating backfill selection and assessing the failure risk of RSSs.
9 February 2021 in Geofluids
Although the mechanisms of slope failure caused by rising groundwater have been widely investigated, the kinematic behavior of landslides in the postfailure stage, which contains essential information for hazard mitigation and risk assessment, has not yet been fully studied. Thus, in this study, a series of numerical simulations using the material point method (MPM) were conducted to analyze the kinematic behavior and soil movement of shallow landslides (infinite slope problems). First, the proposed MPM formulation was validated in a full-scale landslide flume test. The simulated results of final slope profile, runout distance, deposit height, shear band development, slope displacement, and velocity accorded with the experimental results, suggesting that the MPM can quantitatively simulate large deformations. A parametric study of shallow slopes with various hydrological conditions and soil hydraulic and soil mechanical parameters was then performed to assess the influence of the aforementioned factors on landslide kinematics. The simulation results indicated that mechanical behavior at the slope toe is complex; the multiple plastic shear bands generated at the slope toe were due to a combination of shearing and compression. The deposition profile of the slopes was significantly influenced by all input parameters. Among the aforementioned parameters, soil cohesion, location of the groundwater table, and saturated soil permeability most greatly affected runout distance in the sensitivity assessment. Soil friction angle had a minor influence on the kinematic behavior of the slope.