Using the SILAR method Zinc sulfide coatings were deposited on glass slices. The physical properties and the chemical mechanism throughout the variation in concentration of tri-sodium citrate (TSC) as a chelating agent in the synthesis of thin films were investigated. Results shows that ZnS thin films exhibit an average transmittance of 16% in visible light spectra region and a zinc blende structure. The ZnS films synthesized using TSC as a complexing agent, present a smaller average particle size, an average transmittance of 85%, and an adsorption edge at 300–340 nm. Based on our experimental data and analysis, we conclude that the contribution of the oxychloride species, a subproduct in the chemical deposition, is suggested to be related as an impurity level former in the synthesis of ZnS thin films. TSC as a complexing agent in the SILAR technique is a non-toxic option to reduce the generation of the oxychloride species and synthesize a wide band gap semiconductor. Moreover, the use of complexing agents could be extended to other types of semiconductors deposited by SILAR.
We report the photovoltaic performance of a diode based on a p-type tungsten diselenide (WSe2) active region. The device is formed by WSe2 and cadmium sulfide (CdS) layers, both obtained via chemical bath deposition. A novel hydrazine-free chemical formulation allows deposition of WSe2 on glass and flexible Hastelloy substrates. Characterization of WSe2 via Raman spectroscopy shows four bands at 189, 244, 293, and 588 cm−1. The strongest band at 293 cm−1 is assigned to the interlayer interaction mode of the WSe2 layers. The photoluminescent characterization of Hastelloy/CdS/WSe2 samples exhibits two excitonic transitions at 1.7860 and 1.7899 eV. The current density-voltage (J-V) measurements of the CdS/WSe2 structure show a photovoltaic response with VOC = 180 mV, JSC = 0.07 mA/cm2, and FF = 0.22.