Orthogonal Frequency Division Multiplexing (OFDM) technology to deliver mobile broadband and digital television services. This paper presents the real-time implementation of Optical plus Filtered OFDM (O+F OFDM) algorithms for Long Term Evolution (LTE) mobile networks and Digital Video Broadcasting – Second Generation Terrestrial (DVB-T2) systems, with particular focus on deployments in emerging markets. The paper analyzes physical-layer configurations specified in 3GPP TS 36.211 and ETSI EN 302 755, including subcarrier spacing, Fast Fourier Transform (FFT) sizes, cyclic prefix options, modulation schemes, and Multiple-Input Multiple-Output (MIMO) configurations. Field measurements from Nigerian LTE deployments reveal that while theoretical peak rates approach 300 Mbps with 4×4 MIMO on 20 MHz carriers, achieved throughput typically ranges from 15-35 Mbps due to backhaul constraints, interference, and suboptimal network configuration. For DVB-T2, we document parameters enabling 30-50% greater spectral efficiency than first-generation standards through enhanced forward error correction, larger FFT options (up to 32k subcarriers), and rotated constellations. The O+F OFDM implementation demonstrates superior performance characteristics: reduced out-of-band emissions (>45 dB suppression), improved spectral confinement within regulatory masks, and enhanced multipath resilience through optical filtering stages. System-level considerations including adaptive modulation and coding, Quality-of-Service (QoS) bearer management, Self-Organizing Network (SON) algorithms, and carrier aggregation are examined. We strongly recommend Field-Programmable Gate Array (FPGA)-based real-time implementation of O+F OFDM for both MTN's LTE and GOtv's DVB-T2 systems to achieve deterministic signal processing latency below 5 microseconds, support adaptive parameter reconfiguration without hardware modifications, and enable power-efficient operation critical for Nigerian deployment scenarios with unreliable electrical infrastructure.
27 August 2025 in Automation, Control and Intelligent Systems
The main challenge of the well-celebrated Levenberg-Marquardt algorithm (LMA) is the selection of the searching direction and adaptation parameters. Secondly, the implementation of the LMA for online model identification has faced challenges as it is a batch optimization. As a third challenge, the solution of the Levenberg-Marquardt based on the full-Newton nonlinear optimization (FNNO) for online applications have been limited due to its unguaranteed positive definiteness. This paper presents two versions of the modified Levenberg-Marquardt algorithm (MLMA) for neural network model identification and adaptive predictive control for the online dynamic model identification and adaptive control of a self-balancing two-wheel LEGO Mindstorms NXTway-GS robot. The first version is the online-window-approach of the modified Levenberg-Marquardt algorithm (OWA-MLMA) based on approximate Guass-Newton algorithm (AGNA) for training neural network model predictor. The second version is a neural network-based adaptive predictive control (APC) algorithm based on the full-Newton nonlinear optimization of the modified Levenberg-Marquardt algorithm (FNNO-MLMA) for online adaptive control. A NNARMAX model predictor for the NXT robot is first trained and validated using the OWA-MLMA based on AGNA. The validated NNRAMAX model is then used for the design of the NN-APC based on FNNO-MLMA. Finally, the model identification based on OWA-MLMA and APC based on FNNO-MLMA schemes are simulated in closed-loop for online NNARMAX model identification and adaptive predictive control of the NXT robot. The comparison of the proposed OWA-MLMA based on AGNA shows superior performance over the recursive incremental back-propagation algorithm (INCBPA) while the proposed NN-APC based on FNNO-MLMA shows excellent control and good tracking performances over a discrete-time fixed-parameter proportional-integral-derivative (PID) controller for the NXT robot control. The simulation results show that the developed OWA-MLMA based on AGNA and the APC based on FNNO-MLMA can be adapted for the online dynamic modeling, automation, control and robotics applications.
12 November 2025 in American Journal of Embedded Systems and Applications
This paper presents a comprehensive comparative analysis of Orthogonal Frequency Division Multiplexing (OFDM) variants and their practical implementations across multiple domains to guide future communication system design decisions. This paper investigates algorithm comparison and methodologies for OFDM variants, explore optical wireless communication integration, examine neural network-based OFDM mapping techniques, and demonstrate field-programmable gate array (FPGA) realizations. The primary objectives of this research are threefold, namely: 1). to establish comprehensive performance benchmarks for major OFDM variants across key metrics including spectral efficiency, computational complexity, and implementation feasibility; 2). to investigate the synergistic benefits of integrating OFDM with optical wireless communication systems; and 3). to evaluate the effectiveness of neural network-based signal processing in OFDM applications while demonstrating practical FPGA realizations. Through systematic comparison of conventional OFDM, Filtered-OFDM (F-OFDM), Universal Filtered Multi-Carrier (UFMC), and Generalized Frequency Division Multiplexing (GFDM), we establish performance benchmarks across spectral efficiency, power consumption, and computational complexity metrics. The optical wireless integration study reveals significant improvements in data transmission rates and energy efficiency. Neural network mapping demonstrates enhanced channel estimation and equalization capabilities, while FPGA implementations provide real-time processing solutions with optimized resource utilization. Experimental results show up to 25% improvement in spectral efficiency and 40% reduction in computational complexity compared to traditional implementations. The findings contribute to the advancement of next-generation wireless communication systems and provide practical implementation guidelines for researchers and engineers.