26 August 2016 in RSC Advances
Nickel carbide nanoparticles (Ni3C NPs) were synthesized by a polyol solution refluxing route at a temperature of 300 °C for 20 min using triphenylphosphine oxide (TPPO) as the surfactant.
17 September 2020 in CrystEngComm
Yolk–shell Ni/C microspheres composed of Ni@C core–shell nanoparticles were successfully fabricated by decomposing a Ni-based metal–organic framework (Ni-MOF) at 500 °C and 600 °C. The Ni-MOF with a yolk–shell structure was prepared by a solvothermal method with an appropriate molar ratio of Ni(NO3)2·6H2O to C9H6O6 in the presence of PVP. The degree of crystallization of Ni and C was improved by increasing the pyrolysis temperature, which resulted in enhanced complex permittivity and optimized impedance matching of Ni/C microspheres for damping microwave. Meanwhile, the attenuation coefficient of Ni/C microspheres increased with the increment in pyrolysis temperature. The yolk–shell Ni/C microspheres obtained at 600 °C exhibited the optimal reflection loss (RL) reaching −39 dB with a bandwidth of 3.8 GHz (RL < −10 dB) at a thin matching thickness of 1.8 mm. The integrated bandwidth can achieve 12.3 GHz covering Ku-band (12–18 GHz), X-band (8–12 GHz), and most of C-band (5.7–8 GHz) with an appropriate thickness of 1.4–3.9 mm. Such excellent microwave absorption performance can be attributed to the synergistic effect of the magnetic and dielectric losses of Ni/C microspheres due to natural resonance, dipolar polarization and multiple interfacial polarizations at a unique yolk–shell interface, achieving the optimization of impedance matching and microwave attenuation. This work demonstrates that Ni/C microspheres with a desirable yolk–shell structure are potential candidates for the application in microwave absorption field.
28 August 2018 in RSC Advances
The introduction of Al 2 O 3 increased the number of weak acid sites, altered the copper chemical state and improved the catalytic performance and stability consequently.
27 January 2015 in Journal of Nanomaterials
A series of Ni/SiO2 catalysts with different Ni content were prepared by sol‐gel method for application in the synthesis of 2‐methyltetrahydrofuran (2‐MTHF) by hydrogenation of 2‐methylfuran (2‐MF). The catalyst structure was investigated by X‐ray diffraction (XRD), transmission electron microscopy (TEM), X‐ray photoelectron spectroscopy (XPS), and temperature programmed reduction (TPR). It is found that structures and catalytic performance of the catalysts were highly affected by the Ni content. The catalyst with a 25% Ni content had an appropriate size of the Ni species and larger BET surface area and produced a higher 2‐MF conversion with enhanced selectivity in 2‐MTHF.
16 April 2021 in RSC Advances
The additive Ga2O3improved the catalytic performance of CuO–ZnO/HZSM-5 catalysts for hydrogenation of CO2to DME.