18 June 2020 in Advanced Materials
29 March 2019 in Nanoscale
Superparamagnetic iron oxide nanoparticles (SPIONs) are a foundational platform for a variety of biomedical applications. Of particular interest is Magnetic Particle Imaging (MPI), which is a growing area of research and development due to its advantages including high resolution and sensitivity with positive contrast. There has been significant work in the area of in vivo optimization of SPIONs for MPI as well as their biodistribution in and clearance from the body. However, little is known about the dynamics of SPIONs following cellular internalization which may limit their usefulness in a variety of potential imaging and treatment applications. This work shows a clear 20% decrease in magnetic performance of SPIONs, as observed by Magnetic Particle Spectroscopy (MPS), after internalization and systematic consideration of applicable factors that affect SPION signal generation, including microstructure, environment, and interparticle interactions. There is no observed change to SPION microstructure after internalization, and the surrounding environment plays little to no role in magnetic response for the SPIONs studied here. Interparticle interactions described by dipole–dipole coupling of SPIONs held close to one another after internalization are shown to be the dominant cause of decreased magnetic performance in cells. These conclusions were drawn from transmission electron microscopy (TEM) image analysis at relevant length scales, experimentally prepared and characterized SPIONs in varied environmental conditions, and theoretical modeling with Monte Carlo simulations.
1 August 2019 in Biomedical Physics & Engineering Express
In magnetic particle imaging (MPI), the changing magnetization of magnetic nanoparticle (MNP) tracers subjected to an alternating magnetic field is detected. The physical properties of the MNP tracers have a direct effect on the quality of the resulting signal. In order to improve MPI image resolution and sensitivity, optimizing these properties, in particular the MNP core size, is essential. In this work, we investigate the existence of an optimal MNP core size for MPI using stochastic simulations of Langevin equations, supported by magnetic particle spectroscopy (MPS) measurements of highly monodisperse single-core nanoparticles with carefully tailored core sizes. We demonstrate that once the MNP core diameter exceeds around 28 nm (with the exact value depending on applied field properties and non-magnetic nanoparticle coating), relaxation effects will begin to dominate. Furthermore, as nanoparticle size is increased, interparticle interactions make it difficult to stabilize the particles in water and maintain their monodispersity. Taken together, we conclude that 28 nm in core diameter is an optimal size for single-core, monodisperse, magnetite particles used in MPI.
29 March 2019 in Physics in Medicine & Biology
Magnetic particle imaging (MPI) is an imaging modality that detects the response of a distribution of magnetic nanoparticle tracers to alternating magnetic fields. There has recently been exploration into multi-contrast MPI, in which the signal from different tracer materials or environments is separately reconstructed, resulting in multi-channel images that could enable temperature or viscosity quantification. In this work, we apply a multi-contrast reconstruction technique to discriminate between nanoparticle tracers of different core sizes. Three nanoparticle types with core diameters of 21.9 nm, 25.3 nm and 27.7 nm were each imaged at 21 different locations within the scanner field of view. Multi-channel images were reconstructed for each sample and location, with each channel corresponding to one of the three core sizes. For each image, signal weight vectors were calculated, which were then used to classify each image by core size. With a block averaging length of 10 000, the median signal-to-noise ratio was 40 or higher for all three sample types, and a correct prediction rate of 96.7% was achieved, indicating that core size can effectively be predicted using signal weight vector classification with close to 100% accuracy while retaining high MPI image quality. The discrimination of the core size was reliable even when multiple samples of different core sizes were placed in the measuring field.