Narbada Prasad Gupta

Narbada Prasad Gupta

Auto-generated profile, based on publicly available information

Narbada Prasad Gupta

Department of Electronics and Communication Engineering, Ideal Institute of Technology, Ghaziabad, India

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 May 2023 in Wireless Communications and Mobile Computing
Verified
Journal Article
Open access
PDF file
UPUtkarsh Pandey
Utkarsh Pandey
PSParulpreet Singh
Parulpreet Singh
RSRaghvendra Singh
Raghvendra Singh
NGNarbada Prasad Gupta
Narbada Prasad Gupta
SASandeep Kumar Arora
Sandeep Kumar Arora
ENEric Nizeyimana
Eric Nizeyimana
In this paper, we present an extremely compact ultrawideband (UWB) monopole microstrip patch antenna for a wireless body area network (WBAN). The proposed antenna is fabricated on a flexible Rogers RT-5880 dielectric substrate of thickness 0.5 mm and has an overall size of . The proposed antenna achieves a wideband characteristic with the help of a modified ground plane with a monopole pair. The monopole antenna is fed through a microstrip line and has a good impedance matching over a frequency band of 3.2 to 15 GHz (and beyond), with an axial ratio below 3 dB and a high efficiency of 77–95%. This antenna is designed to cover almost the complete UWB range; bandwidth for antenna is 11.52 GHz (3.48-15 GHz). The antenna has a realized gain of 2.3–7.2 dBi throughout the frequency band and has been tested for conformality. Measured results are found to be in good correlation with the simulated results. The antenna has also been tested for specific absorption rate (SAR) values within the simulation to compare with Federal Communications Commission (FCC) limits and verify their suitability for the Internet of Things- (IoT-) based wearable body area network.

4 January 2017 in Wireless Personal Communications
Verified
Journal Article
Closed access
PDF file
NGNarbada Prasad Gupta
Narbada Prasad Gupta
MKMithilesh Kumar
Mithilesh Kumar

1 August 2019 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
NGNarbada Prasad Gupta
Narbada Prasad Gupta
MKMithilesh Kumar
Mithilesh Kumar
RMRanjan Maheshwari
Ranjan Maheshwari
Antennas for off-body wearable applications needs to be flexible and its electrical characteristics should be stable in different body postures, different bending or stretching environments. Therefore, the designed antenna should be such that, even if the antenna is bent frequently, it should operate properly. In this paper, a conformal UWB antenna is reported which has been optimized to be conformal to any body shape and size. The proposed antenna has been designed on RT Duroid substrate with dielectric constant of 2.2 and loss tangent 0.0009. The thickness of the material is 0.127 mm. Due to low thickness; it can easily be bent and mounted on curved surfaces. The size of the antenna is 35 × 31 mm2. To accomplish the design process, two different bending radii have been considered to bend the proposed antenna. The two bending radii of 25 mm and 50 mm have been chosen; one corresponding to the arm of a healthy child of around 5 years age and another corresponding to a healthy person of age about 35 years with medium built. The simulated radiation efficiency and total antenna efficiency are more than 60% for the bending at 25 mm and 50 mm radii in the UWB frequency range from 3.1 GHz to 10.6 GHz. The gain of the proposed antenna for both the bending radii is changing from 1.4 dB to 5.3 dB. The return loss of the proposed antenna is obtained for 25 mm and 50 mm bending radii of curvatures and it is below 10 dB in UWB range. A prototype of proposed antenna has been fabricated and tested on Rohde & Schwarz 40 GHz VNA. Measured results are in close agreement with simulation results.

1 April 2015
Verified
Conference Paper
Closed access
NGNarbada Prasad Gupta
Narbada Prasad Gupta
MKMithilesh Kumar
Mithilesh Kumar
Huge numbers of papers have been published on Ultra Wideband (UWB) antennas which present an antenna having satisfactory input reflection coefficient and reasonable radiation pattern. Some additional critical characteristics are also required to be considered in the design of UWB antenna like transient gain, group delay, ringing, signal fidelity and efficiency. In this paper, a novel design of UWB antenna in a thin substrate has been presented. The proposed antenna has been designed on RT Duroid substrate with di-electric constant (?r) of 2.2 and height of 0.127 mm. Reflection co-efficient, gain and radiation pattern at different frequencies have been presented for the proposed antenna. It has been optimized to be operated in UWB frequency range between 3.1 GHz to 10.6 GHz. The Gain of 2.5 has been observed for the antenna, which is almost constant. Slot insertion method has been used in the proposed antenna design to optimize radiation pattern.

1 July 2016
Verified
Conference Paper
Closed access
NMNarendra Mohan Mishra
Narendra Mohan Mishra
PJPriyanka Jain
Priyanka Jain
NGNarbada Prasad Gupta
Narbada Prasad Gupta
PRPramila
Pramila
Novel differentiator design technique is discussed by means of comparison of transfer function of differentiator define and develop in the Digital signal Processing (DSP) with the transfer function develop by cascade connection of transmission-lines configuration. Z-parameter is then used to define the scattering characteristics of equal electrical length transmission line. Finally, Cascade configuration of transmission-lines will develop second order differentiator and verified it by simulation result. Simulation result validates the mathematical observation obtained.

11 January 2017 in Wireless Personal Communications
Verified
Journal Article
Closed access
PDF file
NGNarbada Prasad Gupta
Narbada Prasad Gupta
MKMithilesh Kumar
Mithilesh Kumar
RMRanjan Maheshwari
Ranjan Maheshwari