Impurity contamination in thin-film solar cells remains an uncertain risk due to the little-known impact of impurities on recombination. Building upon previous work, in which we intentionally contaminated lead halide perovskite (LHP) solar cells with iron, we further examine the distribution and charge state of iron-induced defects in LHP films using synchrotron-based X-ray techniques. X-ray absorption measurements suggest that iron-rich regions, which form among iron feedstock concentrations that exceed 100 ppm, most closely resemble the chemistry of Fe$_{2}$O$_{3}$. Iron distributed within the bulk may form a mix of Fe2+ and Fe3+, the latter of which is not expected to be recombination active, potentially allowing LHPs to incorporate more iron than traditional semiconductors. X-ray beam induced current measurements show little correlation between the presence of iron-rich regions and charge collection, which further suggests low recombination activity at these sites. These results further elucidate the recombination behavior caused by iron incorporation in LHP films, revealing insight into how inhomogeneous incorporation of impurities may mitigate photovoltaic performance degradation.
One of the biggest challenges for carbon based materials application is to tailor their physicochemical properties and assemble them into suitable architectures in a cost-effective and reproducible fashion. To reveal the nucleation, grow and grain stability of Nickel deposits on single microfiber, micro x-ray fluorescence and diffraction studies have been carried out on individual 6μm diameter carbon nanofibers at the Advanced Photon Source using beamline 2-ID-D. By using a specially designed electrochemical cell, synchrotron micro-beam techniques provide in situ structural and compositional characterization capabilities. With the understanding of the nucleation and growth mechanism of metals on the carbon surfaces; mechanical, electrical, thermal and catalytic behaviors of carbon fibers can be further improved thus lead to large-scale engineering applications of carbon based materials in lightning strike prevention, electromagnetic shielding, vibration/acoustic noise reduction, reinforced composites, catalyst substrates, supercapacitors and bio/chemical sensors.