With the growing diffusion of the Internet of Things concept and the advances in low-power electronics, the RFID (Radio Frequency Identification) technology has gained attention in various fields, from entertainment to medicine, for example. Its sensing and signal processing capability allows us to highlight this technology as one of the main solutions in reducing cost and complexity in such applications. This work presents the design and test of a flexible RFID tag operating in the American UHF frequency of 915 MHz, for human body motion detection. Through the analysis of the Received Signal Strength Indicator (RSSI) variation with time and its Fast Fourier Transform (FFT) it was possible to ensure the tag's applicability.
In this paper, is presented a Chebyshev bandpass filter using the substrate integrated waveguide (SIW) technology, a coplanar waveguide (CPW) on the input and output ports and a shunt inductance to perform the coupling between the resonant cavities. The CPW-SIW transitions used the 50 Ω step impedance between the input/output feeding line and the transition to control the filter's input/output couplings. Besides that, the proposed filter is low-cost, since it is manufactured using a printed circuit board (PCB). The presented SIW filter was validated by simulation and measurements, since coherent results were obtained in both methods. A return loss of -50 dB and a minimum insertion loss of -3.3 dB in the bandpass were accomplished, with a bandwidth of 60 MHz at the center frequency of 2.26 GHz.
1 January 2024 in Journal of Microwaves, Optoelectronics and Electromagnetic Applications
This paper proposes a methodology for developing antipodal Vivaldi antennas using RSIW (Ridge Substrate Integrated Waveguide) technology for a specific cut-off frequency. The technique employs metallic-vias and metalized cylindrical posts of reduced sizes inserted in the dielectric substrate. The simulations were performed using the ANSYS® Electronics Desktop software. The antenna RSIW is designed for a resonant frequency of 4 GHz and was fabricated on FR4 (ɛr=4.4 and tanδ=0.02). The structure is compared to an antipodal Vivaldi antenna (AVA) fed by a SIW. The structure proposed had an increase in bandwidth of 4.09 GHz and an increase in gain of 1.41 dBi.