13 September 2024 in Journal of the American Chemical Society
28 February 2019 in Journal of Materials Chemistry A
Lithium–sulfur (Li–S) batteries with high energy density and natural abundance are critical to achieve the low-cost and large-scale energy storage applications. Suffering from the sluggish redox kinetics together with the accumulated intermediate Li2Sx (x = 4–8) polysulfides in the liquid electrolytes during charging/discharging, the high-performance Li–S batteries are stagnant by the issues such as high level of electrochemical irreversibility and poor cyclability. Herein, a bifunctional interlayer composed of metallic conductive NiCo2S4 nanosheets with large area and mesopores supported on carbon textile (NiCo2S4@CT) is fabricated for high-performance Li–S batteries. The mesoporous and metallic conductive NiCo2S4 nanosheets with large area not only provide strong chemical bonding for polysulfides, but also show efficient catalytic effect towards accelerating the polysulfide redox reactions. When served as an interlayer, NiCo2S4@CT endows the Li–S batteries with a high initial capacity of ∼1600 mA h g−1 at 0.1C and ultra-stable cycling performance with a slow capacity decay rate of 0.018% per cycle over 500 cycles. The results proffer a facile and promising approach to design Li–S batteries with high rate performance and high reversible capacities.
2 July 2024 in Advanced Functional Materials
7 December 2021 in Energy & Environmental Materials
SiO–based materials are promising alloys and conversion‐type anode materials for lithium‐ion batteries and are recently found to be excellent dendrite‐proof layers for lithium‐metal batteries. However, only a small fraction of the Li–Si–O compositional space has been reported, significantly impeding the understanding of the phase transition mechanisms and the rational design of these materials both as anodes and as protection layers for lithium‐metal anodes. Herein, we identify three new thermodynamically stable phases within the Li–Si–O ternary system (Li2SiO5, Li4SiO6, and Li4SiO8) in addition to the existing records via first‐principle calculations. The electronic structure simulation shows that Li2SiO5 and Li4SiO8 phases are metallic in nature, ensuring high electronic conductivity required as electrodes. Moduli calculations demonstrate that the mechanical strength of Li–Si–O phases is much higher than that of lithium metal. The diffusion barriers of interstitial Li range from 0.1 to 0.6 eV and the interstitial Li hopping serves as the dominating diffusion mechanism in the Li–Si–O ternary systems compared with vacancy diffusion. These findings provide a new strategy for future discovery of improved alloying anodes for lithium‐ion batteries and offer important insight towards the understanding of the phase transformation mechanism of alloy‐type protection layers on lithium‐metal anodes.
17 July 2025 in Green Chemistry
The hydroxyl-functionalized ionic liquid modified Pt/ionomer interface contributes to the enhancement of H+ conductivity, O2 transport, and catalytic activity within the catalyst layers of proton exchange membrane fuel cells.
15 April 2025 in Inorganic Chemistry Frontiers
The advancement of high-efficiency Pt catalysts with reduced Pt loading is crucial for proton exchange membrane fuel cells (PEMFCs). This research presents a methodology that significantly increases the performance of Pt/C through the interactions between Pt and Fe–Nx/Ce–Nx on carbon, thereby effectively reducing Pt consumption. Density functional theory (DFT) calculations indicate that the presence of Fe–Nx/Ce–Nx together enhances the strong interaction between Pt and FeCe–NC, decreasing the d-band energy level (εd) of Pt, which leads to the reduction of O* adsorption and acceleration of desorption at the Pt sites. Consequently, the Pt/FeCe–NC demonstrates exceptional performance for the ORR. The Pt/FeCe–NC has an E1/2 of 0.927 V and decays by only 7 mV after 30 000 accelerated stress test (AST) cycles under acidic conditions. Furthermore, the Pt/FeCe–NC (2.14 W cm−2) surpasses Pt/C (1.78 W cm−2) regarding peak power density in PEMFCs. This innovative approach clarifies the interactions between Pt and Fe–Nx/Ce–Nx, providing a framework for the design of advanced catalysts.