4 July 2024 in IEEE Transactions on Antennas and Propagation
Fully polarimetric multiple input multiple output (MIMO) radars are getting more and more applications for near-field polarimetric scattering matrix (PSM) imagery. A polarimetric MIMO radar consists of a large number of transmitting and receiving channels. The crosstalk and imbalance among the channels severely distort the measured PSM. In this article, a fully polarimetric calibration technique for a near-field MIMO imaging radar is proposed using a single passive calibrator named quarter concave cylinder linked dihedral (QCCLD) reflector which was presented in our previous work. The bistatic PSM of the QCCLD is derived based on physical optics (PO) approximation. For a QCCLD rotating around the line of sight (LOS) between the centers of the MIMO array and the calibrator, higher order scattering components are excited under bistatic transceiver antennas. Besides, a polarimetric calibration procedure for near-field MIMO imaging radar is developed. Utilizing Fourier analysis, three main scattering components (MSCs) of the QCCLD are extracted, while the undesirable scattering components which degrade the calibration accuracy are suppressed. Outdoor experiments are conducted using a polarimetric near-field MIMO imaging radar over 12–18 GHz frequency band. It is shown that after fully polarimetric calibration using the QCCLD, an improvement of more than 12 dB in polarization isolation is obtained, validating the proposed technique. Further analysis using polarimetric decomposition of the calibrated PSM images for both the Sandia laboratories implementation of cylinders (SLICY) benchmark target and a Volvo sport utility vehicle (SUV) demonstrate the usefulness in identifying scattering mechanisms.
20 March 2025 in IEEE Aerospace and Electronic Systems Magazine
Polarimetric signatures play key roles in electromagnetic (EM) characterization of radar targets. It is mandatory for any real-world polarimetric radar system to be fully calibrated to remove the impact of channel distortion and inter-channel cross-talk on the measured polarimetric scattering matrices (PSMs), if we are to understand what polarimetric signatures actually are, and if we are to exploit the data for radar image understanding, classification, recognition and so on. In this short article, we concentrate on the issues for accurate calibration and processing for fully polarimetric radar systems, which are becoming increasingly important in both low radar cross section (RCS) development and cognitive radar sensing.
12 August 2024 in IEEE Transactions on Geoscience and Remote Sensing
Polarimetric active radar calibrators (PARCs) are getting more and more applications in calibration of polarimetric radar systems because of their flexible operational modes and adjustable radar cross section (RCS). In this paper, a new programmable radio frequency (RF) switched double-antenna PARC (SIDAPARC) is designed and implemented, which consists of a transponder using two dual-polarized antennas operated through the control of two single-pole double-throw (SPDT) RF switches. Standard reference polarimetric scattering matrices (PSMs) can be obtained by switching the polarization states of the receive and transmit channels using the two program-controlled SPDT switches. Considering the distortion of calibrator, a modified polarimetric measurement signal model for SIDAPARC is developed. A polarimetric calibration procedure based on the pre-calibration technique for SIDAPARC is proposed. The polarization crosstalk factors of calibrator can be estimated through the pre-calibration. During the calibration of a polarimetric radar system, compensating for these factors enhances the estimates of radar system distortion parameters, thus, improves polarization calibration performance. Both indoor and outdoor experiments are conducted to demonstrate the usefulness of the proposed calibration procedure with more than 16 dB improvement of polarization isolation for fully polarimetric imagery.
23 May 2025 in IEEE Transactions on Antennas and Propagation
Conventional three-dimensional (3-D) near-field radar image simulation requires electromagnetic (EM) scattering data collection over a densely sampled frequency-azimuth-elevation sector, resulting in burdensome or even impractical computational complexity. In this paper, a fast Fourier transform (FFT)-accelerated 3-D near-field radar scattering image generation technique is proposed for objects over rough surfaces, applicable at arbitrary observation angles. A closed-form expression for the 3-D spatially variant point spread function (SVPSF) is derived to directly calculate near-field image-domain contributions from ray tubes traced using the multipath model enhanced shooting and bouncing rays (MP-SBR) [30]. The multiple scattering effect is addressed by developing a spatial mapping process. The 3-D radar image formation is formulated as a convolution integral, allowing the FFT-acceleration scheme to significantly reduce the computational complexity. Moreover, the 3-D resolution equations are derived and used to evaluate radar image quality. Simulated radar images are compared with both measured and simulated counterparts by conventional technique to demonstrate the high fidelity and efficiency of the proposed technique.
13 February 2025 in IEEE Geoscience and Remote Sensing Letters
In a multipath environment, the fully polarized reflection coefficients significantly impact the polarimetric measurement and calibration of a target, due to the depolarization effects of its underlying surface. In this letter, a technique for estimating the fully polarized reflection coefficients of underlying rough surfaces by means of a switchable double-antenna polarimetric active radar calibrator (SIDAPARC) is proposed. Calibrated polarimetric measurements in multipath environments with different underlying surfaces are conducted to validate the usefulness of the proposed technique. Experimental results demonstrate the effective extraction of fully polarimetric radar returns directly from the target, with noticeable suppression of multipath components from the underlying surface reflections.