21 September 2022 in IEEE Transactions on Transportation Electrification
To improve the speed synchronization performance of dual switched reluctance motor (SRM) drive with traditional sliding mode control (TSMC), the improved sliding mode control (ISMC) based cross-coupling control strategy is proposed. Firstly, the overall control structure of the dual-SRM drive is represented. Secondly, the state variable is introduced to reduce the torque fluctuation and adjustment time of the dynamic process of each SRM drive in the system based on the traditional sliding surface and sliding mode reaching law. The adaptive law is introduced into the sliding mode controller to avoid the load torque observation. Thirdly, the ISMC-based cross-coupling control method for the speed synchronization of the dual-SRM drive is designed. The novel sliding surface is proposed considering the speed synchronization deviation. The novel sliding mode reaching law is represented by introducing the state variables. Then the ISMC-based cross-coupling control method is realized for speed synchronization. The stability is proved by Lyapunov function. Simulations and experiments are implemented to verify the effectiveness of the proposed method.
1 July 2022 in IEEE Transactions on Transportation Electrification
Accurate phase currents are necessary for the control and protection of motor drives. In this article, a novel phase current reconstruction strategy for switched reluctance motors (SRMs) with single current sensor is proposed. Firstly, the characteristic of the unsaturated phase inductance is analyzed. Secondly, the location of the single current sensor is rearranged, and all phase currents flow through the sensor in positive direction. The phase current in unsaturated region is directly obtained by dividing the flux linkage by the unsaturated inductance. In the linear region, the phase current is calculated by solving the similar triangles according to the relationship between the unsaturated inductance and saturated inductance. Finally, the overall control strategies of SRM drive integrated with the proposed phase current reconstruction method are implemented. The proposed method can be used for different chopping modes and different control strategies. Simulations and experiments on a three-phase 12/8 SRM validate the effectiveness of the proposed phase current reconstruction scheme.
19 August 2022 in IEEE Transactions on Instrumentation and Measurement
Saturation and current measurement errors will decrease the accuracy of rotor position estimation for a switched reluctance motor (SRM). To avoid the drawbacks, a rotor position estimation method based on the unsaturated inductance reconstruction is proposed, considering current measurement errors. First, the incremental, apparent, and unsaturated inductances are analyzed. The unsaturated inductance is calculated with the similar triangle solution in normal condition during the linear inductance rising region. To avoid the pulse injection, the linear regression algorithm is used to calculate the virtual unsaturated inductance in the linear inductance falling region of adjacent phase. Then, the complete rotor position in each electric period is obtained by combining the estimated position of three phases. Second, the influence of current measurement errors on rotor position estimation is analyzed. The offset error is directly avoided by detecting the zero-value region of phase currents. The scaling error is compensated by balancing the amplitudes of three-phase unsaturated inductances. The proposed method does not need additional hardware and can avoid the influence of saturation and current measurement errors simultaneously. Experimental results validate the effectiveness of the proposed method.
31 December 2024 in IEEE Transactions on Transportation Electrification
In order to improve the dynamic performance of the speed synchronization control method for the dual-switched reluctance motor (SRM) drive, a virtual spindle strategy with the disturbance observation feedforward compensation for speed synchronization is proposed. First, a disturbance observer is designed based on the motor mechanical equation and the perturbation observation strategy. The total disturbance of the dual-SRM drive is observed by introducing a time-varying control factor. The virtual speed command is obtained based on the virtual spindle control structure and the motor parameters with the designed disturbance observer. Then, the virtual speed command is used as the reference speed of the dual-SRM controller. Second, in order to improve the dynamic response performance of the dual-SRM, the reference speed compensation strategy is calculated based on the observed disturbances, actual speed, and reference speed. The reference speed of two motors is regulated with the virtual speed command and the calculated compensation value. The effectiveness of the proposed method has been verified with simulations and experiments.