A novel concept of a Fabry–Perot (F–P) cavity composed of two linearly chirped fiber Bragg gratings written in a thermally fused fiber taper is presented. Both chirped gratings are written in counter-directional chirp configuration, where chirps resulting from the optical fiber taper profile and linearly increasing grating periods cancel each other out, forming a high-quality F–P resonator. A new strain-sensing mechanism is proposed in the presented structure, which is based on strain-induced detuning of the F–P resonator. Due to the different strain and temperature responses of the cavity, the resonator can be used for the simultaneous measurement of these physical quantities, or it can be used as a temperature-independent strain sensor.
In this Letter, we propose the application of a Volterra predistorter to compensate for the second-order nonlinear distortion generated in light-emitting diode (LED) communication systems. We demonstrate that a predistorter dedicated specifically to the LED has linear (not quadratic) numerical processing complexity. Experimental investigation performed using pulse amplitude modulation (PAM-4) indicates that it achieves similar performance as the classical Volterra equalizer located at the receiver. The highest measured gain in electrical signal to noise and interference power ratio of predistortion over linear equalization was at 300 Mbaud and was approximately 3.5 dB. At the same baud rate, the unpredistorted signal had a received optical power penalty of up to 2.5 dBm compared with the predistorted signal.
This paper investigates the challenge of finding and analyzing security vulnerabilities among widely available low-budget Internet of Things smart home appliances. It considers the identification of security vulnerabilities within the appliances’ embedded software and connectivity functions over wired and wireless channels in local networks and external communications with manufacturers’ cloud services. To analyze the security of these appliances, a universal laboratory test bench is proposed and a set of methodologies for testing the security of smart home devices is described. The proposed testing platform offers a practical solution for security analysis of Internet of Things smart home devices and it can serve as a reference approach for future research. The results from the research indicated varying levels of susceptibility across different types of devices. A list of recommendations for manufacturers and others to improve the security level of these appliances is provided. The findings emphasize the need for regular security assessments of smart home devices, to maintain the protection of personal and sensitive information.
31 October 2023 in Journal of Telecommunications and Information Technology
In this paper, we investigate how data transmissions may be affected by various types of optical interference introduced into the fiber on purpose, via a clip-on coupler. The research proved that transmissions may be jammed completely using inexpensive equipment readily available on the market, provided that the attacker has physical access to the fiber optic cable. The most dangerous attacks rely on a typical, slowly modulated communication laser with a rectangular waveform. This study urges further research aimed at counteracting such attacks.
1 August 2016 in Sensors and Actuators A: Physical