Wafaa Mahdi Salih

Wafaa Mahdi Salih

Auto-generated profile, based on publicly available information

Wafaa Mahdi Salih

Materials Engineering Department, University of Technology, Baghdad, Iraq

Research Focus & Metrics

Academic Career Length

18Years (2009-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 December 2025 in Journal of Materials Science: Materials in Engineering
Verified
Journal Article
Open access
PDF file
HAHuda Aljawmart
Huda Aljawmart
WSWafaa M. Salih
Wafaa M. Salih
AAAhmed H. Ali
Ahmed H. Ali
KHKater Alnada Faris Husham
Kater Alnada Faris Husham
This study aims to evaluate and compare the mechanical performance of hemp and corn husk fibers as natural reinforcements in a polymer blend matrix composed of 80% epoxy and 20% polycarbonate (PC). Composite samples were fabricated using the hand layup technique with varying fiber loadings of 2%, 4%, and 6% for each fiber type. Mechanical characteristics such as impact strength, fracture toughness, and tensile strength, Young’s modulus, and hardness were measured to assess the influence of fiber type and content. Results showed that corn husk fiber composites exhibited superior fracture toughness (up to 120.38 MPa·m^1/2 at 6%) and Young’s modulus (0.97 GPa at 6%) compared to hemp fiber composites, while both showed comparable hardness (77 HRF at 2%). SEM analysis confirmed strong interfacial adhesion between the natural fibers and the polymer matrix. Overall, the study demonstrates that corn husk fibers, despite being underutilized, offer promising reinforcement potential and can outperform conventional hemp fibers in certain mechanical aspects.

1 January 2025 in Polímeros
Verified
Journal Article
Open access
TSTamam Mahdi Salih
Tamam Mahdi Salih
WSWafaa Mahdi Salih
Wafaa Mahdi Salih
The accumulation of plastic waste, especially polyethylene terephthalate (PET), is a major environmental concern. This research focuses on the use of recycled polyethylene terephthalate (r-PET) as a building material in concrete, and studies the improvement of its properties by reinforcing it with natural and synthetic fibers. The effect of adding hemp fibers on the mechanical and physical properties of PET composites was investigated. Results after curing each sample for 7, 14, and 28 days showed that reinforcing r-PET with fibers significantly increased compressive strength, flexural strength, and density, making it a suitable option as a complement or partial replacement for conventional concrete. Furthermore, the use of hemp fibers, as a renewable and biodegradable resource, enhances the sustainability of the resulting materials. It contributes to the production of high-performance, environmentally friendly building materials, reduces plastic waste, supports the economy, and can be applied in semi-structural concrete to promote sustainable construction techniques.

14 July 2026 in Journal of Materials Science: Materials in Engineering
Verified
Journal Article
Open access
PDF file
HAHuda Aljawmart
Huda Aljawmart
WSWafaa M. Salih
Wafaa M. Salih
In recent years, the need for sustainable alternatives to hazardous synthetic fibers has driven significant research in the field of polymer composites. This study presents the development and characterization of epoxy-based hybrid composites reinforced with sawdust and fly ash, aimed at enhancing structural insulating applications. The sawdust was alkali-treated to improve interfacial bonding, and various particle sizes of fly ash were incorporated. Composites were fabricated using the hand lay-up method with a fixed epoxy content of 95%, combined with 5% reinforcement of sawdust and varying fly ash contents (0.5, 1, 1.5, 2 wt.%). Mechanical tests revealed improvements in tensile strength, impact resistance, hardness, and compressive strength compared to neat epoxy. FTIR research revealed physical interactions between the components of the composite without the creation of new chemical bonds. Thermogravimetric analysis (TGA) showed that the addition of sawdust and fly ash improved the composites' thermal resilience by delaying the onset of thermal degradation and raising the amount of residual char at higher temperatures. This behavior implies that the fillers function as thermal barriers, decreasing heat transfer and delaying the epoxy matrix's breakdown. Additional evidence for changes in thermal behavior brought on by filler addition came from differential scanning calorimetry (DSC). Thermal conductivity test revealed a reduction by 50% W/m·K as filler content increased, confirming the composites’ potential as effective thermal insulators. These findings demonstrate the potential of utilizing agricultural and industrial waste to produce lightweight, cost-effective, and mechanically robust insulating panels.

1 January 2018 in AIP Conference Proceedings
Verified
Conference Paper
Closed access
PDF file
WSWafaa Mahdi Salih
Wafaa Mahdi Salih
NANiveen Jamal Abdulkader
Niveen Jamal Abdulkader
SSSana Mahdi Salih
Sana Mahdi Salih
This research were studied the effect of some mechanical properties for composite materials reinforced fiber and prepared from material (polyester with various natural fibers) then studied the effect of chemical treatment on the same fiber immerse in 10% NaOH solution for half an hour and then compared, the results of the same test of composite materials without and with chemical treatment and the results proved that there is a clear effect when treat the fiber compared to non-chemical treatment of the fibers also noted that hemp fibers loaded the stress higher than other fibers for both cases to distinguish them that the hemp fiber has continuous fibers either the other fibers are characterized by the type of cross linking or chopped types in tensile test, and the results of the same test of composite materials without and with chemical treatment and the results proved that the hardness of the fiber composite while the treated fiber composite samples better than the untreated fiber, and from the figures the palm leaf has the highest value than lufa fiber, hemp fiber and the smallest value is in sisal fiber because of the nature of formation fibers materials.

1 May 2009 in American Journal of Applied Sciences
Verified
Journal Article
Open access
PDF file
WSWafaa M. Salih
Wafaa M. Salih
SSSanaa M. Salih
Sanaa M. Salih
MSMyada M. Salih
Myada M. Salih
The Effect of Time Variation on the Wear Sliding Behavior of Composites

1 September 2014 in Engineering and Technology Journal
Verified
Journal Article
Open access
PDF file
WSWafaa Mahdi Salih
Wafaa Mahdi Salih
In this research polymer was prepared from Alkyd resin (U-PTE) with ratio 100% the and natural rubber with ratio 30%. The mixing process was performed by hand lay-up method. Some mechanical properties were studied in this work which included (flexural bending, shear stress, Impact test (charpy method) . the results showed that the addition of natural rubber to (u-pte) resin with this ratio leads to become the brittle behavior and decrease in the shear stress increase the ability of material to impact because the blend materials become elastic .the flexural strength increase of blend two times comparing with its value of pure resin while the result of shear stress value of blend showed decreasing with ratio(43%) but the impact value of blend increased with ratio (20%) with it value before the blending.