Mohammad Fatouraie

Mohammad Fatouraie

Auto-generated profile, based on publicly available information

Mohammad Fatouraie

Robert Bosch LLC

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 December 2015 in Particle and Fibre Toxicology
Verified
Journal Article
Open access
PDF file
DLDingsheng Li
Dingsheng Li
Masako MorishitaMasako Morishita
Masako Morishita
JWJames G. Wagner
James G. Wagner
MFMohammad Fatouraie
Mohammad Fatouraie
MWMargaret Wooldridge
Margaret Wooldridge
OJOlivier Jolliet
Olivier Jolliet
Cerium oxide (CeO2) nanoparticles used as a diesel fuel additive can be emitted into the ambient air leading to human inhalation. Although biological studies have shown CeO2 nanoparticles can cause adverse health effects, the extent of the biodistribution of CeO2 nanoparticles through inhalation has not been well characterized. Furthermore, freshly emitted CeO2 nanoparticles can undergo an aging process by interaction with other ambient airborne pollutants that may influence the biodistribution after inhalation. Therefore, understanding the pharmacokinetic of newly-generated and atmospherically-aged CeO2 nanoparticles is needed to assess the risks to human health. A novel experimental system was designed to integrate the generation, aging, and inhalation exposure of Sprague Dawley rats to combustion-generated CeO2 nanoparticles (25 and 90 nm bimodal distribution). Aging was done in a chamber representing typical ambient urban air conditions with UV lights. Following a single 4-hour nose-only exposure to freshly emitted or aged CeO2 for 15 min, 24 h, and 7 days, ICP-MS detection of Ce in the blood, lungs, gastrointestinal tract, liver, spleen, kidneys, heart, brain, olfactory bulb, urine, and feces were analyzed with a mass balance approach to gain an overarching understanding of the distribution. A physiologically based pharmacokinetic (PBPK) model that includes mucociliary clearance, phagocytosis, and entry into the systemic circulation by alveolar wall penetration was developed to predict the biodistribution kinetic of the inhaled CeO2 nanoparticles. Cerium was predominantly recovered in the lungs and feces, with extrapulmonary organs contributing less than 4 % to the recovery rate at 24 h post exposure. No significant differences in biodistribution patterns were found between fresh and aged CeO2 nanoparticles. The PBPK model predicted the biodistribution well and identified phagocytizing cells in the pulmonary region accountable for most of the nanoparticles not eliminated by feces. The biodistribution of fresh and aged CeO2 nanoparticles followed the same patterns, with the highest amounts recovered in the feces and lungs. The slow decrease of nanoparticle concentrations in the lungs can be explained by clearance to the gastrointestinal tract and then to the feces. The PBPK model successfully predicted the kinetic of CeO2 nanoparticles in various organs measured in this study and suggested most of the nanoparticles were captured by phagocytizing cells.

1 November 2015 in Fuel
Verified
Journal Article
Closed access
HLHui Liu
Hui Liu
ZWZhi Wang
Zhi Wang
YLYan Long
Yan Long
SXShouzhi Xiang
Shouzhi Xiang
JWJianxin Wang
Jianxin Wang
MFMohammad Fatouraie
Mohammad Fatouraie

8 April 2013 in SAE International Journal of Fuels and Lubricants
Verified
Journal Article
Closed access
PDF file
MFMohammad Fatouraie
Mohammad Fatouraie
MWMargaret Wooldridge
Margaret Wooldridge
SWSteven Wooldridge
Steven Wooldridge
A single-cylinder Direct Injection Spark Ignition (DISI) engine with optical access was used to investigate the effects of ethanol/gasoline blends on in-cylinder formation of particulate matter (PM) and fuel spray characteristics. Indolene was used as a baseline fuel and two blends of 50% and 85% ethanol (by volume, balance indolene) were investigated. Time resolved thermal radiation (incandescence/natural luminosity) of soot particles and fuel spray characteristics were recorded using a high speed camera. The images were analyzed to quantify soot formation in units of relative image intensity as a function of important engine operating conditions, including ethanol concentration in the fuel, fuel injection timing (250, 300 and 320° bTDC), and coolant temperature (25°C and 90°C). Spatially-integrated incandescence was used as a metric to quantify the level of in-cylinder PM formed at the different operating conditions. The experiments were conducted at stoichiometric conditions, fixed engine speed of 1500 RPM, a load condition of approximately 5.5 bar IMEPⁿ, with a fixed intake manifold absolute pressure of 76 kPa. Significant reduction in in-cylinder soot formation was observed with the higher ethanol content in the fuel, regardless of fuel injection timing. Fuel impingement was documented in the spray imaging, and fuel impingement was a large factor affecting the level of PM emissions. Retarded fuel injection timing reduced the PM formed in-cylinder for the two fuel blends and the baseline gasoline. Higher coolant temperatures reduced liquid fuel on piston and cylinder wall surfaces, and therefore also reduced in-cylinder PM formation. The in-cylinder crank-angle-resolved data presented in this study are the first of their kind to document in-cylinder PM formation of ethanol fuel blends. The results provide insight on how ethanol fuel blends can be used to reduce DISI PM formation at varying levels of ethanol concentration in the fuel.

3 April 2018 in SAE International Journal of Advances and Current Practices in Mobility
Verified
Conference Paper
Closed access
PDF file
MFMohammad Fatouraie
Mohammad Fatouraie
MFMario Frommherz
Mario Frommherz
MMMichael Mosburger
Michael Mosburger
ECElana Chapman
Elana Chapman
SLSharon Li
Sharon Li
GFGina Fioroni
Gina Fioroni
Gasoline Direct Injection (GDI) has become the preferred technology for spark-ignition engines resulting in greater specific power output and lower fuel consumption, and consequently reduction in CO2 emission. However, GDI engines face a substantial challenge in meeting new and future emission limits, especially the stringent particle number (PN) emissions recently introduced in Europe and China. Studies have shown that the fuel used by a vehicle has a significant impact on engine out emissions. In this study, nine fuels with varying chemical composition and physical properties were tested on a modern turbo-charged side-mounted GDI engine with design changes to reduce particulate emissions. The fuels tested included four fuels meeting US certification requirements; two fuels meeting European certification requirements; and one fuel meeting China 6 certification requirements being proposed at the time of this work. Two risk safeguard fuels (RSG), representing the properties of worst case market fuels in Europe and China, were also included. The particle number concentration of the solid particulates was measured in the engine-out exhaust flow at steady state engine operations with load and speed sweeps, and semi-transient load steps. The test results showed a factor of 6 PN emission difference among all certification fuels tested. Combined with detailed fuel analyses, this study evaluated important factors (such as oxygenates, carbon chain length and thermo-physical properties) that cause PN emissions which were not included in PMI index. A linear regression was performed to develop a PN predictive model which showed improved fitting quality than using PMI.

3 April 2018 in SAE International Journal of Advances and Current Practices in Mobility
Verified
Conference Paper
Closed access
PDF file
MMMario Medina
Mario Medina
MFMohammad Fatouraie
Mohammad Fatouraie
MWMargaret Wooldridge
Margaret Wooldridge
High-pressure gasoline fuel injection is a means to improve combustion efficiency and lower engine-out emissions. The objective of this study was to quantify the effects of fuel injection pressure on transient gasoline fuel spray development for a wide range of injection pressures, including over 1000 bar, using a constant volume chamber and high-speed imaging. Reference grade gasoline was injected at fuel pressures of 300, 600, 900, 1200, and 1500 bar into the chamber, which was pressurized with nitrogen at 1, 5, 10, and 20 bar at room temperature (298 K). Bulk spray imaging data were used to quantify spray tip penetration distance, rate of spray tip penetration and spray cone angle. Near-nozzle data were used to evaluate the early spray development.The bulk characteristics of the high pressure gasoline sprays were consistent with trends previously observed at lower fuel injection pressures, e.g. spray tip penetration distance increased with increased fuel injection pressure after the spray break-up time and sprays with higher cone angles were produced with increasing chamber pressure at constant fuel injection pressure. The spray break-up time was a strong function of the chamber pressure at lower fuel injection pressures, but the sensitivity to chamber pressure was negligible for fuel injection pressures over 1200 bar. The experimental results for spray tip penetration distance, spray tip penetration rate and spray break-up time were compared with several correlations from the literature. For the majority of the conditions, the spray tip penetration distance was under-predicted and the spray break-up time was over-predicted. Cavitation was not observed at any condition; however, the near-nozzle imaging results showed evidence of vapor pre-jets. The frequency of occurrence of the pre-jets transitioned from no observations at a chamber pressure of one bar to ~80% for chamber pressures of 20 bar, regardless of fuel injection pressure.

24 April 2015 in Energy & Fuels
Verified
Journal Article
Closed access
MFMohammad Fatouraie
Mohammad Fatouraie
MWMargaret S. Wooldridge
Margaret S. Wooldridge
BPBenjamin R. Petersen
Benjamin R. Petersen
SWSteven T. Wooldridge
Steven T. Wooldridge