21 November 2023 in ACS Applied Materials & Interfaces
28 January 2019 in Nanotechnology
A cost-effective process for producing high-performance Ag-paste-based flexible transparent nanomesh electrodes (FTNEs) was developed by optimizing their linewidth, pitch, and height. These nanomesh electrodes, with a linewidth of several hundred nanometers and a pitch of 10-200 μm on a PET substrate, achieved wide ranges of transmittance (83.1%-98.8%) and sheet resistance (1.2-30.9 Ω/sq) and a figure of merit (992-1619) superior to those of indium tin oxide and silver nanowire (AgNW) electrodes. Our evaluation of their flexibility (testing up to 50 000 cycles) and their electromagnetic interference shielding effectiveness verifies the applicability of these FTNEs to various flexible optoelectronic devices.
3 February 2023 in Journal of Micromechanics and Microengineering
Transparent electromagnetic interference (EMI) shielding films have gained considerable attention for the commercialization of the 5G wireless technology based on electromagnetic waves in the GHz range. In this study, transparent EMI shielding films with embedded metal meshes on a 100 μm thick polyethylene terephthalate film for EMI shielding were fabricated using ultraviolet imprinting and Ag paste filling techniques. The various EMI shielding film types were fabricated by varying the width, aperture size, and height of the mesh electrode to evaluate the efficiency of the EMI shielding according to the incident electromagnetic wave frequency and morphology of the mesh metallic electrodes. The results indicate that the EMI shielding efficiency (SE) increased with a decrease in the aperture size of the metal mesh electrodes and an increase in their height. The average EMI SE values of the fabricated film in the 0.5–18 GHz range reached 48.3 dB and 59.6 dB at a light transmittance of approximately 90% and 77%, respectively. The fabricated EMI shielding films can be used for various applications, such as communications, aerospace, medical equipment, and military.
1 February 2004 in International Journal of Machine Tools and Manufacture
21 September 2017 in Journal of Micromechanics and Microengineering
This study reports a novel method for fabricating a nickel nanomesh mold using phase shift lithography, suitable for use in large-area touch screen panel applications. Generally, the values of light transmittance and sheet resistance of metal mesh transparent conducting electrode (TCE) films are determined by the ratio of the aperture to metal areas. In this study, taking into consideration the optimal light transmittance, sheet resistance, and pattern visibility issues, the line width of the metal mesh pattern was ~1 µ m, and the pitch of the pattern was ~100 µ m. In addition, a novel method of manufacturing wiring electrodes using a phase shift lithography process was also developed and evaluated. A TCE film with a size of 370 mm × 470 mm was prepared and evaluated for its light transmittance and sheet resistance. In addition, wiring electrodes with a length of 70 mm were fabricated and their line resistances evaluated by varying their line width.
18 September 2019 in Journal of Micromechanics and Microengineering
A transparent flexible heater with nano amorphous patterns (TFHAs) was fabricated using a nanofiber mask. Amorphous patterns of 600 nm, which displayed no starburst phenomenon upon illumination, were realized using conventional photolithography. The engraved Ag-paste-filled 100 mm × 100 mm conducting film achieved a transmittance of 89.9% and two-terminal resistance of 9.5 Ω, which improved to 6.4 Ω by poly(3,4-ethylenediosythiophene) (PEDOT) coating. Applying a 12 V bias, TFHAs with PEDOT achieved temperatures of 100 °C within 30 s and withstood up to 15 000 bending cycles with minimal degradation.