25 July 2024 in Sustainable Environment Research
CSCleani Figueredo Fideles da Silva
Cleani Figueredo Fideles da Silva
JDJoão Batista Cordeiro Dantas
João Batista Cordeiro Dantas
+3
Bioelectricity generation from sugarcane is significant across Brazil and is related to regional market structure characteristics where the mills are located. To understand the distribution and conjuncture of this sector, this study analyzes the pattern of location, concentration and clustering of the bioelectricity supply from sugarcane bagasse in Brazil, for 2017 and 2022. The data were obtained from the Brazilian National Electric Energy Agency, and the methodology was based on concentration indices and scan statistics. The results showed that the Southeast region presented the most thermoelectric power plants and installed capacity. The Southeast and Midwest regions were highly concentrated in terms of quantity and sugarcane bioelectricity installed capacity. Five clusters were identified for the number of power plants in 2017; for 2022, there were eight clusters. Regarding installed potential, there were 14 clusters in 2017 and 23 clusters in 2022, all statistically significant. The existence of clusters provides information on the competitive advantages in the national market, which can drive new investments in more densified areas or in the neighborhood. Identification of the location and concentration pattern showed that facilities in the state of São Paulo and the Northeast coast were responsible for the most important share of supply. These results indicate to investors the impact of electricity generation on the sector and the most relevant location for installing new thermoelectric plants.
31 October 2022 in International Journal of Geoscience, Engineering and Technology
The coiled tubing system is made up of a long and flexible steel tube wound around a coil, which can reach over 6000 meters in length. During operation, part of the tube remains wound on the spool, while the other part is directed into the well. In this tube, different types of fluids, such as water, cement paste and displacement fluid, are pumped in order to ensure the isolation of the well. This work presents three stage of experiment that was carried out with water and xanthan gum solutions that had rheological properties and behavior that approximated a used cement paste. In the first stage of this study, data from pumping water and cement paste in a real well abandonment process were used to validate a mathematical modeling. The simulated data approximated the field data with a mean relative error below 9%. In the second stage experiments were carried out with xanthan gum solution at a concentration of 0.5 lb bbl-1, and temperatures of 30ºC and 40ºC. The objective of this study was to verify if the model proposed by the author is valid for different concentrations and temperatures. Finally, in the third stage of the study, simulations were carried out in order to obtain the maximum pumping capacity of the system, with the installation of a new pump. The simulated data shown that the water flow reached the turbulent regime with a maximum pumping flow of 2 m3 h-1, while the flow of the xanthan gum solution did not reach the turbulent regime, even reaching a maximum flow of 3 m3 h-1.