17 November 2016 in Welding International
One of the main reasons for the development of API 5L-X80 steel was its use in polar regions, where high toughness at low temperatures is required. This work studied the effect of the cooling rate in welding on the mechanical and metallurgical properties of this type of steel. Different cooling rates also simulate different welding energies. The different cooling rates were obtained with five different preheating regimes. The interpass temperature was equal to the preheating temperature of each of the double-V joints with root face, robotic welding being carried out by electric arc with shielding gas and consumable electrode (‘Metal Active Gas’ – MAG), solid wire with mechanical strength equivalent to the base metal (‘matching’) and shielding gas consisting of 75% Ar and 25% CO2. The welded joints were analysed using light microscopy and scanning electron microscopy (SEM), as well as mechanical testing: tensile, bending, impact (Charpy-V) and hardness (Vickers). The results of the mechanical tests were satisfactory and correlated with the metallurgical analyses. The joints had high impact strength (Charpy-V) at test temperatures of up to −40 °C.
1 March 2015 in Soldagem & Inspeção
Uma das principais razões para o desenvolvimento do aço API 5L-X80 foi seu uso em Regiões Polares, onde se faz necessário alta tenacidade em baixas temperaturas. Neste trabalho foi estudado o efeito da taxa de resfriamento na soldagem sobre as propriedades mecânicas e metalúrgicas deste tipo de aço. Estas diversas taxas de resfriamento simulam também diversas energias de soldagem. As diferentes taxas de resfriamento foram obtidas através de cinco distintos pré-aquecimentos. A temperatura de interpasse foi igual à temperatura de pré-aquecimento de cada uma das juntas em duplo V com face de raiz, sendo as soldagens robotizadas realizadas por arco elétrico com gás de proteção e eletrodo consumível (“Metal Active Gas” – MAG), arame maciço com resistência mecânica equivalente (“matching”) ao metal base e gás de proteção composto de 75% Ar e 25% CO2. Para análise das juntas soldadas foram utilizados microscópio de luz e microscópio eletrônico de varredura (MEV), bem como ensaios mecânicos de tração, dobramento, impacto (Charpy-V) e dureza (Vickers). Os resultados dos testes mecânicos foram satisfatórios e apresentaram correlação com as análises metalúrgicas. As juntas apresentaram alta resistência ao impacto (Charpy-V) em temperaturas de teste de até –40 °C.