In the current study, ZnO/chitosan bio-composite films were produced via solution-casting method. Two different ZnO powders, micrometer (d50 ≅ 1.5 μm) and nanometer sized (d50 ≅ 100 nm), were used to investigate the effect of ZnO particle size and concentration (0, 2, and 8% w/w of chitosan) on the mechanical and antibacterial properties of the ZnO/chitosan bio-composite films. The incorporation of the ZnO powders into the chitosan film resulted in an increase in the tensile strength (TS) and a decrease in the elongation at break (EB) values. Mechanical test results revealed that TS and EB properties were considerably affected (p < 0.05) by the concentration and particle size of the ZnO reinforcement. Disc diffusion method demonstrated good antibacterial activities of bio-composite films containing high amount of ZnO (8% w/w of chitosan) against Escherichia coli, Staphylococcus aureus, Klebsiella pneumoniae, and Bacillus subtilis. The growth-limiting effect of the films was more pronounced for S. aureus and K. pneumoniae. Due to enhanced TS and imparted antibacterial activity of the produced ZnO/chitosan bio-composite films, these materials are promising candidates for applications such as food packaging, wound dressing, and antibacterial coatings for various surfaces.
Globally increased bivalve aquaculture production results in a vast amount of by-product discharges such as scallop shells. Utilization of these wastes to produce new products such as antibacterial agents can cooperate to reduce environmental problems and provide a high value-added product at a lower cost. In this study, scallop shells are heat-treated at 800°, 900°, 1000°, and 1100°C for 4 hours at atmospheric conditions. X-ray diffraction analysis revealed that calcium carbonate is the only inorganic phase in the powdered scallop shells. Ten weeks after the thermal treatment of the scallop shells, the calcium hydroxide phase was the only crystalline phase determined by X-ray diffraction analysis for the samples calcined at 1000° and 1100°C. At lower calcination temperatures, calcium carbonate and calcium hydroxide phases were co-existing in the samples. Scanning electron microscopy investigations depicted that using scallop shells as a starting material to synthesize nanometer-sized calcium hydroxide is achieved. It was determined that applied calcination temperature has a significant effect on the particle size of the obtained calcium hydroxide phase. Antimicrobial activity of calcined and uncalcined shell powders were tested against Escherichia coli and Staphylococcus aureus. No antibacterial activity was detected for the uncalcined scallop shell powders. However strong antibacterial activity was determined for the powders after subjection to calcination. Calcination of scallop shells is an environmentally friendly, readily applied, and low- cost approach to achieve nanometer-size calcium hydroxide that can be used as an inorganic antibacterial material in various composite systems.
In this study, a simple, innovative approach is applied to produce porous a-TCP-CeO2-Al2O3 composite beads via using bovine bone-derived hydroxyapatite, cerium oxide, and alumina ceramics. Bovine-bone derived hydroxyapatite was obtained via calcination of bones at 950°C for 3 hours. Hydroxyapatite is a thermally unstable biomaterial at high temperatures, and depending on its stoichiometry decomposes at 800-1200°C. Sodium alginate was successfully used as an in situ gelling templates for the production of the ceramic beads and starch, an environmentally friendly and economic pore-forming agent, is used to achieve interconnected, highly open porosity containing composite beads. Sintering of the ceramic−starch−alginate green composite beads at 1200°C for 1 hour resulted in the decomposition of the hydroxyapatite phase and formation of a-TCP. XRD analysis revealed that a-TCP-CeO2-Al2O3 composite beads were achieved. XRD analysis confirmed the formation of a-TCP phase in all composite compositions. SEM investigations of the produced composite beads revealed that bimodal pore size distribution, fine and coarse, was achieved.