29 August 2016 in IEEE Transactions on Sustainable Energy
A model of the power coefficient of a mid-scale Magnus wind turbine using numerical solutions of the Blade Element Momentum Theory and symbolic regression is presented. A direct method is proposed for solving the nonlinear system of equations which govern the phenomena under study. The influence of the tip-speed ratio and the number, aspect ratio, and the angular speed of the cylinders on the turbine performance is obtained. Results show that the maximum power coefficient is on the order of 0.2, which is obtained with two low aspect ratio cylinders, a dimensionless cylinder speed ratio of 2, and a turbine tip-speed ratio between 2 and 3. The predicted power coefficient at low tip-speed ratio suggests that a Magnus turbine may be adequate in the urban environment.
29 April 2014 in Water International
The objective of this study was to determine the quantitative goals for a large-scale fog collection project if it were to be an economically competitive source of freshwater in northern Chile. When the initial costs are factored in, the cost of water from such a project would exceed the market price of the alternatives. However, given current costs, the project could be profitable given an average collection rate of about 10 litres per day per square metre. Investment in site selection and system improvements to reduce costs and improve collection rates are essential for making large-scale fog collection an economically competitive source of freshwater.
25 May 1996 in Journal of Fluid Mechanics
Detailed three-dimensional phase-averaged measurements of the spanwise and streamwise vorticity formation and evolution in a forced mixing layer have been obtained. A plane two-stream mixing layer with a velocity ratio (U2/U1) of 0.6, a maximum Reynolds number (Reδ) of about 3150 and laminar initial boundary layers was generated in a mixing layer wind tunnel. Acoustic forcing, consisting of a fundamental roll-up frequency and its subharmonic, was used to phase-lock the initial development and first pairing of the spanwise vortical structures. For the first time, phase-averaged measurements of all three velocity components have been obtained on a three-dimensional grid, yielding the spanwise and streamwise vorticity distributions without invoking Taylor's hypothesis. The phase-averaged results show that the streamwise vorticity first appears in the form of ‘ribs’ just upstream of the first spanwise vortex roll-up. At the same time, the first spanwise roller becomes kinked, thus also contributing to the streamwise vorticity. As a result, in cross-stream cuts through the spanwise rollers, the streamwise vorticity appears in a ‘three-tier’ arrangement with opposite-signed vorticity in the centre. In terms of phase-averaged quantities, the maximum streamwise vorticity in the initial ribs is equivalent to about 10–15% of the peak spanwise vorticity and the streamwise rib circulation is equivalent to about 5–10% of the spanwise circulation. Further downstream, the peak streamwise vorticity decreases with increasing distance, while the average circulation remains approximately constant. Downstream of the pairing, the streamwise vorticity levels in the spanwise rollers are reduced. However, the spanwise spacing of the streamwise vortices does not increase within the measurement domain. Phase-averaged Reynolds stress measurements show that relatively high stress levels (periodic and random) were generated in the cores of the spanwise vortices.
1 June 1995 in Physics of Fluids
In the present study, errors in using Taylor’s hypothesis to transform measurements obtained in a temporal (or phase) frame onto a spatial one were evaluated. For the first time, phase‐averaged (‘‘real’’) spanwise and streamwise vorticity data measured on a three‐dimensional grid were compared directly to those obtained using Taylor’s hypothesis. The results show that even the qualitative features of the spanwise and streamwise vorticity distributions given by the two techniques can be very different. This is particularly true in the region of the spanwise roller pairing. The phase‐averaged spanwise and streamwise peak vorticity levels given by Taylor’s hypothesis are typically lower (by up to 40%) compared to the real measurements.
23 January 2016 in Acta Mechanica
1 August 1993 in Physics of Fluids A: Fluid Dynamics
Previous measurements in a two-stream plane mixing layer have shown that the mean streamwise vorticity decays monotonically with downstream distance such that it is absent in the far-field (self-similar) region [J. H. Bell and R. D. Mehta, J. Fluid Mech. 239, 213 (1992); AIAA J. 28, 2034 (1990)]. It was not clear at that time if this measured decay reflected the diffusion of the instantaneous streamwise vorticity or was a result of increasing vortex meander within the mixing layer. The present experimental study was conducted in order to determine the existence of streamwise vortex meander in a mixing layer, and if present, its significance on the measured properties. The dependence of the velocity cross-correlation on the fixed probe location was shown to be a good indicator of the stationarity of the streamwise vortex location. The cross-correlation measurements obtained here indicate that spanwise meander is negligible, although transverse apparent meander (normal to the plane of the mixing layer) was indicated. The transverse meander, exemplified by the elliptical shape of the mean streamwise vorticity contours, was expected, since the streamwise vorticity in the braid region is essentially inclined, with respect to the streamwise direction. These conclusions were supported by results of estimated spanwise profiles of the transverse velocity component. The balance of evidence suggests that the measured mean streamwise vorticity decay is representative of the decay of the vorticity rather than an artifact of meander.