A significant amount of oil (i.e. 60–70%) remains trapped in reservoirs after the conventional primary and secondary methods of oil recovery. Enhanced oil recovery (EOR) methods are therefore necessary to recover the major fraction of unrecovered trapped oil from reservoirs to meet the present-day energy demands. The chemical EOR method is one of the promising methods where various chemical additives, such as alkalis, surfactants, polymer, and the combination of all alkali–surfactant–polymer (ASP) or surfactant–polymer (SP) solutions, are injected into the reservoir to improve the displacement and sweep efficiency. Every oil field has different conditions, which imposes new challenges toward alternative but more effective EOR techniques. Among such attractive alternative additives are polymeric surfactants, natural surfactants, nanoparticles, and self-assembled polymer systems for EOR. In this paper, water-soluble chemical additives such as alkalis, surfactants, polymer, and ASP or SP solution for chemical EOR are highlighted. This review also discusses the concepts and techniques related to the chemical methods of EOR, and highlights the rheological properties of the chemicals involved in the efficiency of EOR methods.
30 October 2023 in Geotechnical and Geological Engineering
Surfactants are considered as beneficial chemical additives in enhanced oil recovery due to their capability of reducing the interfacial tension and altering the wettability. However, the loss of surfactant by adsorption on the surface of the porous rock is one of the significant drawbacks of surfactant flooding. The mechanism, equilibrium, and kinetics of adsorption of a natural surfactant derived from the weed, Eichhornia crassipes, on sandstone and sand surfaces have been investigated through batch experiments at different concentrations (i.e., 1000–5000 mg dm−3), temperatures (i.e., 298–333 K), and a fixed salinity [NaCl (76.2%), CaCl2 (3.7%), MgCl2 (1.5%), and Na2SO4 (18.6%)]. The mineralogy and morphology of the adsorbent samples were examined by the XRD and SEM analyses. The mechanism of surfactant adsorption and maximum adsorption were determined by various isotherms and kinetic models. for adsorption on sandstone and sand was found to be −21.48 and −20.80 kJ mol−1, respectively.
7 April 2023 in Chemical Engineering Communications
The enhanced oil recovery (EOR) method is widely used for recovering residual crude oil after implementing conventional oil recovery techniques. Chemical additives, such as surfactants, are considered beneficial for EOR. Their efficacy is assessed based on their ability to reduce interfacial tension, modify wettability, and establish a stable emulsion system. Understanding the mechanism of surfactant adsorption at the oil–water interface is critical for effectively implementing surfactant flooding. In this work, we have studied the adsorption of a natural surfactant synthesized from Eichhornia crassipes at the oil–water interface using numerous interfacial analyses. The results show substantial adsorption at the oil–water interface, indicated by a 27% increase in zeta potential (i.e. −25.2 to −37.2 mV) and ∼27 times increase in film elasticity (i.e. 0.15–4.12 Pa at 0.01 Hz frequency and 0.01% strain). The synthesized natural surfactant demonstrates a noteworthy improvement in the stability of the oil-in-water emulsion and interfacial rheological properties, indicating its potential application in EOR. Graphical Abstract