3 September 2019 in Optics Express
Silicon carbide (SiC) ceramics have been widely used for microelectronics, aerospace, and other industrial fields due to their excellent chemical stability and thermal tolerance. However, hard machinability and low machining precision of SiC ceramics are the key limitations for their further applications. To address this issue, a novel method of underwater femtosecond laser machining was introduced in this study to obtain high precision and smooth surface of the microgrooves of SiC ceramics. The removal profiles were characterized in terms of width, depth, and surface morphology, which exhibited high dependence on the femtosecond laser processing parameters. The instability during the underwater processing affected by laser-induced gas bubbles and material deposition, however, limits the high surface accuracy of microgrooves and processing efficiency. The process condition transformation from a bubble-disturbed circumstance to a disturbance-free model was carefully investigated through a high speed camera for the femtosecond laser processing of SiC ceramics in water. The experiment results indicated that degree of disturbed effect was heavily dependent on size, distribution, and motion of laser-induced gas bubble. Furthermore, some typical evolution mechanisms of gas bubble and their influence on the removal profiles of microgrooves were discussed in detail. Bubble evolution has been proven to be mainly responsible for the behavior of laser propagation (focus model, total reflection, etc.), which notably affects microstructural characteristic of the microgrooves.
1 December 2019 in Optics Communications
1 August 2018 in International Journal of Thermal Sciences
4 November 2020 in Journal of Composite Materials
In this article, a new ultrafast laser polishing method for SiC/SiC composites was reported and the effects of different incident angles were discussed in detail. The results indicated that the incident angle had a great influence on the polishing of SiC/SiC composites. Under the normal incident condition, the surface roughness was barely improved and the laser-induced defects even degraded the process quality. With the increasing incident angle, surface oxidation and defects dramatically decreased. At 80 degrees, the surface convex structure is almost eliminated and the protruding fiber was neatly cut off. Furthermore, a theoretical model of laser polishing for SiC/SiC composites is used to analyze the laser propagation and power density distribution in different incident angles. The model successfully predicted the laser energy resonance enhancement and illustrated the formation mechanism of laser-induced defects and nanoripples. Meanwhile, the result shows that the laser energy concentrated on the convex fiber of composites as the incident angle increased, which explained that the SiC/SiC composites polishing quality was significantly improved under the inclined incident condition.
1 November 2016 in Applied Surface Science