22 January 2024 in Applied Physics Letters
The ultrabroadband photodetectors are considered to hold significant potential for applications in optical sensing and communication. In this study, we report an ultrabroadband fiber-integrated optical power sensor (FOPS) based on the photothermal effect of multi-walled carbon nanotubes (MWCNTs). The device consists of two main components: the U-shaped fiber (UF) and the photosensitive unit (PSU), wherein the PSU is comprised of polydimethylsiloxane (PDMS) doped with MWCNTs. Under illumination, the photothermal effect of MWCNTs causes a thermal expansion of the PDMS, resulting in compression deformation of UF and transmission spectrum blueshift. Experimental results demonstrate that the proposed device achieves an optical photodetection ranging from 405 nm to 7.767 μm with a responsivity of 0.484 nm/mW. The response time exhibits a rising edge of 13 s and a falling edge of 7 s. Additionally, the device has integrated light motion tracking capability, achieving a displacement resolution of incident light as 1.25 nm/mm. As the proposed FOPS has advantages of ultrabroad detection band and high responsivity, it is a promising design for light detection.
24 February 2025 in Photonics Research
The performance of an all-fiber-integrated photodetector (AFPD) depends on the integration of the active layer, where FA0.4MA0.6PbI3 emerges as a promising candidate due to its high absorbance, long carrier diffusion distance, and self-assembly. In this study, we report an AFPD based on FA0.4MA0.6PbI3 perovskite, along with thickness design for enhancement. The active layer of the AFPD is regarded as a thin-film waveguide for thickness design. Theoretical analysis and simulation results indicate the presence of resonance mode, enhancing and confining the light field even in a thinned active layer. An FA0.4MA0.6PbI3 based metal-semiconductor-metal (MSM) photodetector is directly deposited onto a side-polished multimode fiber (SP-MMF). The transmitted light in fiber leaks from the core to the MSM photodetector through the polished surface of SP-MMF, inducing a detection response. Experimental results demonstrate that the device achieves a responsivity of 3.2 A/W to 650 nm light, with both rising and falling edges of the response time reaching 8 ms. The proposed AFPD and method exhibit potential to simultaneously achieve high responsivity, fast response, and low insertion loss, providing a reliable solution for high-performance photodetection.
20 March 2024 in Research Square
Perovskite exhibits advantages including tunable bandgap, high absorbance and self-assembly, making it potential for high-performance photodetection. In this study, we report an all-fiber-integrated photodetector (AFPD) based on FA0.4MA0.6PbI3 perovskite. The thickness of photodetector’s active layer is designed based on the thin-film waveguide mechanism to optimize device’s responsivity. Theoretical analysis and simulation results indicate the presence of a strong mode field in the active layer meeting the resonance thickness condition, which exhibits the potential to enhance material’s light absorption efficiency and improve device’s responsivity even in a thinned film. Metal-Semiconductor-Metal (MSM) photodetector based on FA0.4MA0.6PbI3 is directly deposited onto a side-polished multimode fiber (SP-MMF). Light transmitted in fiber leaks from core to the MSM photodetector through the polished surface of SP-MMF, inducing a detection response. Experimental results demonstrate that the device achieves a responsivity of 3.2 A/W to 650 nm light, with both rising and falling edges of the response time reaching 8ms. The proposed AFPD exhibits advantages including high responsivity, short response time, low insertion loss and all-fiber integration, providing a reliable solution for the development of high performance AFPD.
15 January 2025 in Applied Optics
All-optical modulators based on two-dimensional (2D) materials hold promising application as key components in the fields of all-optical signal processing and fiber optic communications. In this study, we present an all-optical modulator based on PtSe2 nanosheets integrated with micro-nano fibers (PtSe2-MF) with low power and high stability. PtSe2 nanosheets were deposited on the surface of micro-nano fibers with a diameter of approximately 6 µm using an optical deposition method. A tunable laser with a wavelength of 1550 nm was used as the signal light for modulation, and the 980 nm pump light was coupled with the 1550 nm signal light into the micro-nano fibers (MFs). And the all-optical intensity modulation effect at mW level power was achieved by varying the optical power of the pump light and taking advantage of the absorption of light by PtSe2, to produce light matter interaction. The modulation depth of PtSe2-MF for signal light was measured to be 11.8 dB, the modulation efficiency was 0.295 dB/mW, and the rise and fall response times of the modulation were 22.5 ms and 24.2 ms, respectively. The modulation efficiency of the device only changed by 4.4% after being exposed to the environment for three months, indicating that it still has long-term stability for more than three months. Research has shown that PtSe2-MF has advantages of low power, fast response, high modulation efficiency, and high stability. It has broad application prospects in the field of all-optical modulation.