1 January 2021 in Thermal Science
The main goal of this paper is to develop and prioritize renewable energy scenarios for electricity production. The model proposed in the paper was applied on the example of the municipality of Strpce, enclave in south Kosovo**. The model consists out of three phases, and the decision-making and planning process involves a group of decision makers, i.e. selected experts and stakeholders. In the first phase, a group of decision makers, using a collaborative planning method and Homer pro software, defined eight renewable energy scenarios based on renewable energy potentials and electricity demand in Strpce. In the second phase, a group of decision makers, using the strengths, weaknesses, opportunities, and threats analysis, defined a total of 22 criteria to evaluate scenarios. Finally, in the third phase, a group of decision makers used fuzzy analytical network process methodology to prioritize scenarios. Results show that a scenario that includes installation of photovoltaic panels in Strpce households to cover 50% of the electricity demand is first ranked. The proposed model has a universal character which means that it can be applied in other municipalities/cities and regions. Also, the model enables collaborative planning through the inclusion of different stakeholders whose number and type can be adjusted according to the subject/area of research.
1 February 2017 in Tehnicki vjesnik - Technical Gazette
U radu je prikazan osnovni matematički model (algoritam) za određivanje stanja indukcionog stroja kao i postupak simulacije mjerenja pojedinih vrijednosti u programu MATLAB. Na izlaznim listama prikazana je shema mjernog sustava i...
6 February 2018 in Current Journal of Applied Science and Technology
Aims: The paper presents a model of the power line and the equivalent scheme for the simulation of the transient processes. Many constructions of conductive lines are such that mutual parameters (inductance, capacitance) are the same for any pair of phases, and the phase parameters themselves are approximately the same for all three phases. Therefore, the approximation of three-phase conductors with symmetric single-phase conductors is justified. A special way in which the power lines are considered is a method called a sequence model of three-phase line. Methodology: Techniques used in this paper are based on analytic methods and the formation of algorithms. Modeling and simulation are processes that are necessary for testing faults in measuring transformers in relay protection (current/voltage) when they are very remote and electrically connected by cables. The first step in problem-solving was to define the theoretical model for estimation of the impact of variable parameters on the transmission of electric energy. Further step represented in the paper is simulation of transient processes on different lengths of the power lines when modeling lines and cables, one starts from the fact that parameters differ in certain parts, in lengths, i.e. that the parameters are variable in length, which results in change of longitudinal parameters of basic quadripoles in equivalent schemes. Conclusion: The specificity of the model is that the initial conditions matrix is determined depending on the condition at the beginning of the line and load in equivalent scheme and arises from the idle time or short circuit at the output of the quadripoles. The solution for transient state with the application of quadripole in the equivalent scheme is obtained by matrix procedure using equivalent schemes and by simulation method in the MATLAB program.
1 January 2024 in Tehnika
For the normal functioning of the power system, it is necessary to ensure adequate protection of each elements. Part of the electric power system are electric networks, the term of which will primarily mean lines (air and cable). In the paper, the operation of basic line protections was analyzed by mathematical calculations and field measurements. The earth fault protection was caused in the field in order to compare it with the mathematical calculation and draw conclusions about the correct setting and full functionality of the relay protection. Power grid protection is a key aspect for the safety and normal operation of power systems. This analysis includes tests of protection equipment through simulations of earth fault event. The testing is of great importance for new power system maintenance strategies.